Microstructural stability and mechanical properties of GH742 Ni-based wrought superalloy for turbine disk applications
文献类型：期刊论文
| 作者 | Zhang, Fengzhi1,2; Wang, Changshuai1; Wu, Yunsheng1; Zhou, Lanzhang1; Tian, Qiang3 |
| 刊名 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| 出版日期 | 2022-01-14 |
| 卷号 | 832页码:13 |
| 关键词 | Ni-based wrought superalloy Microstructure evolution Mechanical properties Thermal exposure |
| ISSN号 | 0921-5093 |
| DOI | 10.1016/j.msea.2021.142488 |
| 通讯作者 | Wu, Yunsheng(yswu16b@imr.ac.cn) ; Zhou, Lanzhang(lzz@imr.ac.cn) |
| 英文摘要 | Microstructural stability and mechanical properties were investigated in a Ni-based wrought superalloy during long-term thermal exposure at 650 degrees C and 700 degrees C for up to 7500h. The results demonstrate that the morphology of primary gamma' precipitate has no significant change after long-term thermal exposure, and it exhibits excellent thermal stability both at 650 degrees C and 700 degrees C. However, the morphology of secondary gamma' precipitates transformed from complex flower-like to rounded cubic during long-term exposure at 700 degrees C. The coarsening of tertiary spherical gamma' precipitates occurs with increasing thermal exposure time, and its coarsening behavior is consistent with Ostwald ripening theory. M23C6 carbides coarsen at grain boundaries and form continuous film with increasing time, resulting in the embrittlement of grain boundary. The multimodal distribution of gamma' precipitates results in high strength of the alloy after long-term thermal exposure. Both the strength of the alloy after exposure at 650 degrees C and 700 degrees C for 7500 h are not less than that of the alloy after standard heat treatment. The stress rupture lifetime tests at 650 degrees C/873 MPa increases firstly and then decreases with increasing exposure time at 650 degrees C and 700 degrees C. The increase of stress rupture lifetime is attributed to the supplementary precipitation and growth of finest tertiary gamma' precipitates, while the decrease of it is attributed to the gamma' evolution and the coarsen of M23C6 carbides. |
| 资助项目 | National Science and Technology Major Project of China |
| WOS研究方向 | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000761627800003 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | National Science and Technology Major Project of China |
| 源URL | [http://ir.imr.ac.cn/handle/321006/173198]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Wu, Yunsheng; Zhou, Lanzhang |
| 作者单位 | 1.Chinese Acad Sci, Shi Changxu Innovat Ctr Adv Mat, Inst Met Res, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Hefei 230026, Peoples R China 3.Ctr Iron & Steel Res Inst, High Temp Mat Res Inst, Beijing 100081, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhang, Fengzhi,Wang, Changshuai,Wu, Yunsheng,et al. Microstructural stability and mechanical properties of GH742 Ni-based wrought superalloy for turbine disk applications[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2022,832:13. |
| APA | Zhang, Fengzhi,Wang, Changshuai,Wu, Yunsheng,Zhou, Lanzhang,&Tian, Qiang.(2022).Microstructural stability and mechanical properties of GH742 Ni-based wrought superalloy for turbine disk applications.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,832,13. |
| MLA | Zhang, Fengzhi,et al."Microstructural stability and mechanical properties of GH742 Ni-based wrought superalloy for turbine disk applications".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 832(2022):13. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。