Creep failure and deformation mechanism investigation on a novel single crystal superalloy with various primary ageing temperatures
文献类型：期刊论文
| 作者 | Tao, X. P.1,2; Wang, X. G.2; Meng, J.2; Zhou, Y. Z.2; Yang, Y. H.2; Liu, J. L.2; Liu, J. D.2; Li, J. G.2; Sun, X. F.2 |
| 刊名 | ENGINEERING FAILURE ANALYSIS
 |
| 出版日期 | 2022-03-01 |
| 卷号 | 133页码:14 |
| ISSN号 | 1350-6307 |
| 关键词 | Creep rupture Deformation mechanism High temperature Single crystal superalloy Primary ageing temperature |
| DOI | 10.1016/j.engfailanal.2021.105963 |
| 通讯作者 | Wang, X. G.(xgwang11b@imr.ac.cn) ; Zhou, Y. Z.(yzzhou@imr.ac.cn) |
| 英文摘要 | The heat treatment design and optimization of Re-free low-cost single crystal (SX) superalloys, which are commonly regarded as the most practical and economic alloys to manufacture guide vanes and high-pressure turbine blades of aero-engines, are in great demand. In this study, significant adjustments to the primary ageing temperature (PAT) were made, and the synthetic impact of PAT variations from 1050 degrees C to 1100 degrees C on the microstructure and creep behaviours in novel Re-free SX alloys was investigated in detail. The results showed that the gamma' size and gamma/gamma' lattice misfit increased with increasing PAT, resulting in a reduction in the gamma/gamma' interface area and a shift in the morphology of gamma' from spherical to cubical. Notably, element diffusion and the resultant coarsening of gamma/gamma' structures were facilitated by increasing the PAT. The alloy with 1080 degrees C PAT showed the longest creep life at 1100 degrees C/137 MPa, which was approximately 1.5 and 1.2 times that of alloys with PATs of 1050 degrees C and 1100 degrees C, respectively. Moreover, as PAT increased, the number of microvoids decreased due to increasing the diffusion rate of elements and hindering the formation of vacancies. When the PAT was too low or too high, the "inland shapes" of the gamma' phase and topological inversion phenomenon occurred during creep, which were detrimental to the creep properties. Furthermore, increasing the PAT resulted in the morphology of gamma/gamma' interfacial dislocation networks shifting from sparse waves to fine hexagons and then to coarse hexagons. The dense interfacial dislocation networks in the sample with 1080 degrees C PAT remarkably impeded superdislocations cutting into gamma' phases. Ultimately, the thermodynamics and kinetics of gamma' formation and growth were also discussed, and the optimum PAT was ascertained to provide further guidance to design and develop Re-free low-cost SX superalloys. |
| 资助项目 | National Key R&D Program of China[2017YFA0700704] ; National Science and Technology Major Project[2017-VI-0002-0072] ; Innovation Academy for Light-duty Gas Turbine, Chinese Academy of Sciences[CXYJJ20-MS-03] ; Youth Innovation Promotion Association, Chinese Academy of Sciences |
| WOS研究方向 | Engineering ; Materials Science |
| 语种 | 英语 |
| 出版者 | PERGAMON-ELSEVIER SCIENCE LTD |
| WOS记录号 | WOS:000753120200001 |
| 资助机构 | National Key R&D Program of China ; National Science and Technology Major Project ; Innovation Academy for Light-duty Gas Turbine, Chinese Academy of Sciences ; Youth Innovation Promotion Association, Chinese Academy of Sciences |
| 源URL | [http://ir.imr.ac.cn/handle/321006/173444]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Wang, X. G.; Zhou, Y. Z. |
| 作者单位 | 1.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China 2.Chinese Acad Sci, Shi Changxu Innovat Ctr Adv Mat, Inst Met Res, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Tao, X. P.,Wang, X. G.,Meng, J.,et al. Creep failure and deformation mechanism investigation on a novel single crystal superalloy with various primary ageing temperatures[J]. ENGINEERING FAILURE ANALYSIS,2022,133:14. |
| APA | Tao, X. P..,Wang, X. G..,Meng, J..,Zhou, Y. Z..,Yang, Y. H..,...&Sun, X. F..(2022).Creep failure and deformation mechanism investigation on a novel single crystal superalloy with various primary ageing temperatures.ENGINEERING FAILURE ANALYSIS,133,14. |
| MLA | Tao, X. P.,et al."Creep failure and deformation mechanism investigation on a novel single crystal superalloy with various primary ageing temperatures".ENGINEERING FAILURE ANALYSIS 133(2022):14. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。