Excellent tensile property and its mechanism in Al0.3CoCrFeNi high-entropy alloy via thermo-mechanical treatment
文献类型：期刊论文
| 作者 | Wang, Xiaodi2; Zhang, Zhe2; Wang, Zhengbin1; Ren, Xuechong2 |
| 刊名 | JOURNAL OF ALLOYS AND COMPOUNDS
 |
| 出版日期 | 2022-03-15 |
| 卷号 | 897页码:10 |
| 关键词 | High-entropy alloy Annealing treatment Grain size Tensile property Residual dislocation Twin |
| ISSN号 | 0925-8388 |
| DOI | 10.1016/j.jallcom.2021.163218 |
| 通讯作者 | Wang, Xiaodi(wangxiaodi@ustb.edu.cn) ; Ren, Xuechong(xcren@ustb.edu.cn) |
| 英文摘要 | Al0.3CoCrFeNi is one of the widely studied high-entropy alloys (HEAs) due to the superior properties; however, its strength at room temperature is not satisfactory. The thermo-mechanical method was usually used to tune the mechanical property of materials. Here the as-cast Al0.3CoCrFeNi HEA was cold rolled and subsequently annealed for various times. The microstructural variation was characterized by X-ray diffraction, electron backscatter diffraction and transmission electron microscopy and the mechanical properties were estimated by microhardness and tension tests. It was found that the shorter annealing time led to a finer grain size and higher hardness. Besides, the yield strength of similar to 467 MPa, ultimate tensile strength of similar to 830 MPa and tensile elongation of similar to 48% were achieved in the thermo-mechanically processed alloy, which was comparable with or even a little higher than the previously reported data. The excellent combination of strength and ductility in this alloy was mainly ascribed to the combined action of residual dislocations, refined grains, and annealing and deformation twins in the dislocation motion. The calculated results of the contributions from different strengthening mechanisms to yield strength were well consistent with the experimental data. (C) 2021 Elsevier B.V. All rights reserved. |
| 资助项目 | Fundamental Research Funds for the Central Universities[FRF-TP-19-011A1] ; National Natural Science Foundation of China (NSFC)[52101065] |
| WOS研究方向 | Chemistry ; Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000749472200003 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | Fundamental Research Funds for the Central Universities ; National Natural Science Foundation of China (NSFC) |
| 源URL | [http://ir.imr.ac.cn/handle/321006/173569]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Wang, Xiaodi; Ren, Xuechong |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, CAS Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Peoples R China 2.Univ Sci & Technol Beijing, Natl Ctr Mat Serv Safety, Beijing 100083, Peoples R China |
| 推荐引用方式 GB/T 7714 | Wang, Xiaodi,Zhang, Zhe,Wang, Zhengbin,et al. Excellent tensile property and its mechanism in Al0.3CoCrFeNi high-entropy alloy via thermo-mechanical treatment[J]. JOURNAL OF ALLOYS AND COMPOUNDS,2022,897:10. |
| APA | Wang, Xiaodi,Zhang, Zhe,Wang, Zhengbin,&Ren, Xuechong.(2022).Excellent tensile property and its mechanism in Al0.3CoCrFeNi high-entropy alloy via thermo-mechanical treatment.JOURNAL OF ALLOYS AND COMPOUNDS,897,10. |
| MLA | Wang, Xiaodi,et al."Excellent tensile property and its mechanism in Al0.3CoCrFeNi high-entropy alloy via thermo-mechanical treatment".JOURNAL OF ALLOYS AND COMPOUNDS 897(2022):10. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。