Fatigue properties and S-N curve estimating of 316L stainless steel prepared by SLM
文献类型：期刊论文
| 作者 | Zeng, Fanyu3; Yang, Yongtai2,3; Qian, Guian1,2 ; Qian GA(钱桂安)
|
| 刊名 | INTERNATIONAL JOURNAL OF FATIGUE
 |
| 出版日期 | 2022-09-01 |
| 卷号 | 162页码:21 |
| 关键词 | Metal additive manufacturing 316L stainless steel DMS-PSO Fatigue performance S-N curve |
| ISSN号 | 0142-1123 |
| DOI | 10.1016/j.ijfatigue.2022.106946 |
| 通讯作者 | Yang, Yongtai(yangyongtai@fjirsm.ac.cn) |
| 英文摘要 | This paper investigates the fatigue properties of 316L stainless steel manufactured by selective laser melting technology (SLM) under hot-isostatic-pressing (HIP) heat-treatment. The fatigue tests of 316L specimens were carried out under pulse tensile cyclic loading to obtain the fatigue performance. To avoid falling into local optima and improve the convergence speed, the dynamic multiswarm particle swarm optimizer (DMS-PSO) algorithm was first introduced for parameter optimization of the three-parameter Weibull distribution model, and then the S-N curves based on the model were obtained. The S-N curves were highly consistent with the metallographic and fractographic phenomena. Besides, both the S-N curves and fractographic analysis show that the resistance of high-stress fatigue fracture is significantly improved by using HIP heat-treatment. |
| WOS关键词 | HIGH-CYCLE FATIGUE ; MECHANICAL-PROPERTIES ; PROCESS PARAMETERS ; BEHAVIOR ; MICROSTRUCTURE ; LIFE ; METALS ; PARTS |
| 资助项目 | Science and Technology Project of Quanzhou, China[2019STS01] ; Collaborative Innovation Platform Project of the Fuxiaquan National Independent Innovation Demonstration Zone, China[2020FX01] |
| WOS研究方向 | Engineering ; Materials Science |
| 语种 | 英语 |
| WOS记录号 | WOS:000799365200004 |
| 资助机构 | Science and Technology Project of Quanzhou, China ; Collaborative Innovation Platform Project of the Fuxiaquan National Independent Innovation Demonstration Zone, China |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/89495]  |
| 专题 | 力学研究所_非线性力学国家重点实验室 |
| 通讯作者 | Yang, Yongtai |
| 作者单位 | 1.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech LNM, Beijing 100190, Peoples R China 2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China 3.Chinese Acad Sci, Quanzhou Inst Equipment Mfg, Fujian Inst Res Struct Matter, Jinjiang 362200, Fujian, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zeng, Fanyu,Yang, Yongtai,Qian, Guian,et al. Fatigue properties and S-N curve estimating of 316L stainless steel prepared by SLM[J]. INTERNATIONAL JOURNAL OF FATIGUE,2022,162:21. |
| APA | Zeng, Fanyu,Yang, Yongtai,Qian, Guian,&钱桂安.(2022).Fatigue properties and S-N curve estimating of 316L stainless steel prepared by SLM.INTERNATIONAL JOURNAL OF FATIGUE,162,21. |
| MLA | Zeng, Fanyu,et al."Fatigue properties and S-N curve estimating of 316L stainless steel prepared by SLM".INTERNATIONAL JOURNAL OF FATIGUE 162(2022):21. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。