Effect of Minor Sc Addition on Microstructure and Tensile Properties of Hot-Extruded 7055 Alloy
文献类型：期刊论文
| 作者 | Zhang, Guowei2; Feng, Xiaohui1; Yang, Yuansheng1 |
| 刊名 | JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
 |
| 出版日期 | 2022-06-06 |
| 页码 | 8 |
| 关键词 | Al alloy hot extrusion microstructure scandium addition tensile properties |
| ISSN号 | 1059-9495 |
| DOI | 10.1007/s11665-021-06383-y |
| 通讯作者 | Zhang, Guowei(20030358@nuc.edu.cn) ; Feng, Xiaohui(xhfeng@imr.ac.cn) |
| 英文摘要 | The microstructure and tensile properties of hot-extruded Al-8Zn-2Mg-2Cu-0.15Zr alloy (7055 alloy) with the minor addition of Sc were investigated. The 0.1 and 0.2 wt.% Sc were added into 7055 alloy during the preparation process by conventional casting. Attributing to the Sc additions, the grain sizes of as-cast ingots were remarkably refined and the irregular grain morphology changed to nearly spherical. Correspondingly, the distinctly refined microstructure of the 7055 alloy with Sc addition was achieved after hot extrusion. Unlike most reported extrusion cases of 7055 alloy, the extrusion temperature and ram speed were set to be 500 degrees C and 0.1 mm/s, respectively. As the added Sc increased from 0 to 0.1 and 0.2 wt.%, the yield strength (YS) of the T6 treated samples of extruded 7055 alloys were improved from 652 to 660 and 695 MPa, and the ultimate tensile strength (UTS) was 701, 706, and 744 MPa, respectively. The elongation of all the T6 samples remained to be about 11.5%. The good tensile properties of these experimental alloys are mainly attributed to grain refinement, extrusion texture, and the abundant precipitated particles, including Al-3(ScZr) and eta(MgZn2), which effectively pin the dislocation and hinder the migration of grain boundaries. |
| 资助项目 | National Key Research and Development Program of China[2018YFE115800] ; National Science and Technology Major Project[2017-VI-0003-0073] ; Key Research and Development Plan of Shandong Province[2019JZZY020329] |
| WOS研究方向 | Materials Science |
| 语种 | 英语 |
| WOS记录号 | WOS:000806671200002 |
| 出版者 | SPRINGER |
| 资助机构 | National Key Research and Development Program of China ; National Science and Technology Major Project ; Key Research and Development Plan of Shandong Province |
| 源URL | [http://ir.imr.ac.cn/handle/321006/174191]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Zhang, Guowei; Feng, Xiaohui |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 2.North Univ China, Sch Mat Sci & Engn, Taiyuan 030051, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhang, Guowei,Feng, Xiaohui,Yang, Yuansheng. Effect of Minor Sc Addition on Microstructure and Tensile Properties of Hot-Extruded 7055 Alloy[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022:8. |
| APA | Zhang, Guowei,Feng, Xiaohui,&Yang, Yuansheng.(2022).Effect of Minor Sc Addition on Microstructure and Tensile Properties of Hot-Extruded 7055 Alloy.JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,8. |
| MLA | Zhang, Guowei,et al."Effect of Minor Sc Addition on Microstructure and Tensile Properties of Hot-Extruded 7055 Alloy".JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022):8. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。