Selection of Twin Variants in Dynamic Plastic Deformation of Pure Ti at Liquid Nitrogen Temperature
文献类型：期刊论文
| 作者 | Gao Dong3; Zhou Yu2; Yu Ze1; Sang Baoguang3 |
| 刊名 | ACTA METALLURGICA SINICA
 |
| 出版日期 | 2022-09-11 |
| 卷号 | 58期号:9页码:1141-1149 |
| 关键词 | pure Ti microstructure geometric compatibility factor orientation compatibility factor twin variant |
| ISSN号 | 0412-1961 |
| DOI | 10.11900/0412.1961.2021.00491 |
| 通讯作者 | Zhou Yu(yzhou@imr.ac.cn) ; Sang Baoguang(sangbg@dlpu.edu.cn) |
| 英文摘要 | Pure Ti can form twins during deformation due to the hcp crystal structure, and some kinds of twins can easily form under certain conditions, thus affecting the properties of materials. It has considerable influence on the properties of materials through the regulation of twin types and variants. This work investigates the effect of the dislocation slip of adjacent grains on the selection of twin variants during the deformation of pure Ti. The dynamic plastic deformation (DPD) of commercially pure Ti (99.9%) was performed at liquid nitrogen temperature (-196 degrees C). The microstructure before and after the deformation was observed using EBSD. The influence of twinning on Schmid factor (m) before and after deformation was investigated, and a mechanism for selecting twin variants of polycrystalline pure Ti was proposed. The results show that after DPD at liquid nitrogen temperature, high-density primary twins appeared in pure Ti, followed by secondary and double twins. After twinning, the Schmid factor of basal slip changed noticeably, and the m of a large number of grains was close to 0.5. Based on the geometric compatibility factor (m') of the original slip and twin matching relationship and the Schmid factor of an adjacent grain (m(1)), a new orientation compatibility factor omega (omega = m(1).m') was established, and the selection of twin variants in the plastic deformation of polycrystalline pure titanium was quantitatively analyzed. It was discovered that the omega determines the selection of twin variants in pure Ti, and the pyramidal slip of the adjacent grain plays a significant role in promoting the initiation of twin variants. |
| 资助项目 | Joint Research and Development Fund of Liaoning Province and Shenyang National Laboratory for Materials Science[2019JH3/30100030] ; Young Talents Project of Shenyang National Laboratory for Materials Science ; Natural Science Foundation Project of Liaoning Provincial Department of Education[J2020050] |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000841981600005 |
| 出版者 | SCIENCE PRESS |
| 资助机构 | Joint Research and Development Fund of Liaoning Province and Shenyang National Laboratory for Materials Science ; Young Talents Project of Shenyang National Laboratory for Materials Science ; Natural Science Foundation Project of Liaoning Provincial Department of Education |
| 源URL | [http://ir.imr.ac.cn/handle/321006/174494]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Zhou Yu; Sang Baoguang |
| 作者单位 | 1.AVIC Shenyang Aircraft Co Ltd, Shenyang 110850, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China 3.Dalian Polytecn Univ, Sch Mech Engn & Automat, Dalian 116034, Peoples R China |
| 推荐引用方式 GB/T 7714 | Gao Dong,Zhou Yu,Yu Ze,et al. Selection of Twin Variants in Dynamic Plastic Deformation of Pure Ti at Liquid Nitrogen Temperature[J]. ACTA METALLURGICA SINICA,2022,58(9):1141-1149. |
| APA | Gao Dong,Zhou Yu,Yu Ze,&Sang Baoguang.(2022).Selection of Twin Variants in Dynamic Plastic Deformation of Pure Ti at Liquid Nitrogen Temperature.ACTA METALLURGICA SINICA,58(9),1141-1149. |
| MLA | Gao Dong,et al."Selection of Twin Variants in Dynamic Plastic Deformation of Pure Ti at Liquid Nitrogen Temperature".ACTA METALLURGICA SINICA 58.9(2022):1141-1149. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。