Compositional optimization of high-solid-loading ceramic cores via 3D printing
文献类型：期刊论文
| 作者 | An, Xiaolong1,2,3,4; Mu, Yahang2,3,4; Chen, Jiawang2,3,4; Liang, Jingjing2,3,4; Li, Jinguo2,3,4; Zhou, Yizhou2,4; Sun, Xiaofeng2,4 |
| 刊名 | ADDITIVE MANUFACTURING
 |
| 出版日期 | 2022-10-01 |
| 卷号 | 58页码:15 |
| 关键词 | Ceramic cores Stereolithography 3D printing Fused silicon Crack Mechanical performance |
| ISSN号 | 2214-8604 |
| DOI | 10.1016/j.addma.2022.103054 |
| 通讯作者 | An, Xiaolong(xlan19b@imr.ac.cn) ; Liang, Jingjing(jgli@imr.ac.cn) |
| 英文摘要 | In this study, the effects of ZrO2 mineralizer on the curing behavior of a silica-based core slurry and the microstructure and properties of the core were analyzed to optimize the properties of the samples. The results show that ZrO2 addition aggravates the light scattering effect during the curing process, which increases the mis-cured region. However, ZrO2 readily reacts with the fused silica glass in the matrix to form ZrSiO4, which inhibits the initiation and propagation of cracks and improves the high-temperature mechanical properties of the 60 vol% high-solid-loading core slurry. The content of ZrO2 mineralizer in the slurry should be controlled within the range of 2.0-2.5 vol% for optimal mechanical performance. |
| 资助项目 | National Science and Technology Major Project, China[Y2019 -VII -0011-0151] |
| WOS研究方向 | Engineering ; Materials Science |
| 语种 | 英语 |
| WOS记录号 | WOS:000834076000002 |
| 出版者 | ELSEVIER |
| 资助机构 | National Science and Technology Major Project, China |
| 源URL | [http://ir.imr.ac.cn/handle/321006/174705]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | An, Xiaolong; Liang, Jingjing |
| 作者单位 | 1.Semicond Mfg Int Corp, Shanghai 201203, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shi changxu Innovat Ctr Adv Mat, Shenyang 110016, Peoples R China 3.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China 4.CAS key Lab, Space Mfg Technol, Beijing 100094, Peoples R China |
| 推荐引用方式 GB/T 7714 | An, Xiaolong,Mu, Yahang,Chen, Jiawang,et al. Compositional optimization of high-solid-loading ceramic cores via 3D printing[J]. ADDITIVE MANUFACTURING,2022,58:15. |
| APA | An, Xiaolong.,Mu, Yahang.,Chen, Jiawang.,Liang, Jingjing.,Li, Jinguo.,...&Sun, Xiaofeng.(2022).Compositional optimization of high-solid-loading ceramic cores via 3D printing.ADDITIVE MANUFACTURING,58,15. |
| MLA | An, Xiaolong,et al."Compositional optimization of high-solid-loading ceramic cores via 3D printing".ADDITIVE MANUFACTURING 58(2022):15. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。