中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
首页 机构 成果 学者
  
  1. CAS IR Grid
  2. 力学研究所
  3. 中国科学院力学研究所
  4. 非线性力学国家重点实验室
Microstructure and mechanical properties of SiC particle reinforced Zr-based metallic glass surface composite layers produced by laser alloying

文献类型：期刊论文

作者Qian, Yongfeng4; Zhang, Di4; Hong, Jing4; Zhang, Lin3; Jiang MQ(蒋敏强)1,2; Huang, Hu4; Yan, Jiwang3
刊名SURFACE & COATINGS TECHNOLOGY
出版日期2022-09-25
卷号446页码:10
ISSN号0257-8972
关键词Metallic glass SiC particle Laser surface alloying Ceramic phase Hardness
DOI10.1016/j.surfcoat.2022.128784
通讯作者Huang, Hu(huanghu@jlu.edu.cn)
英文摘要Metallic glasses (MGs) are a promising candidate for advanced structural applications due to their superior mechanical properties. Improving their surface mechanical properties would be of great importance for pro-moting their structural and functional applications. In this study, SiC particles were used as the reinforcement to improve the mechanical properties of Zr-based MG via laser surface alloying. The influences of the average laser power and overlap ratio between neighboring laser processing lines on the microstructure and mechanical properties of the laser-alloyed surface layer were investigated. The experimental results indicated that ZrC and SiC phases were successfully introduced into the MG matrix by laser surface alloying, and the content of these two hard ceramic phases was dependent on the laser processing parameters. The formed laser-alloyed surface layers exhibited a significant improvement in overall hardness compared with the as-cast specimen. At a rela-tively high overlap ratio of 70%, the average hardness of the MG matrix within the laser-alloyed surface layer reached 28.91 GPa, which was three times higher than that of the as-cast specimen (6.46 GPa). Furthermore, the microstructural characteristics and mechanical properties of the cross-sections of the laser-alloyed samples were characterized. The thickness of the laser-alloyed surface layer reached several tens of microns, and the SiC particles were uniformly dispersed in the whole laser-alloyed surface layer. This study confirms the feasibility for improving the mechanical properties of MGs by laser surface alloying, which is expected to broaden the application of MGs as structural and functional components under harsh severe conditions.
分类号二类/Q1
WOS关键词MATRIX COMPOSITES ; WEAR-RESISTANCE ; FLOW
资助项目National Natural Science Foundation of China[51705197] ; Graduate Innovation Fund of Jilin University[101832020CX106] ; Opening Project of the Key Laboratory of CNC Equipment Reliability, Ministry of Education, Jilin University[202104] ; Fundamental Research Funds for the Central Universities (2019-2022)
WOS研究方向Materials Science ; Physics
语种英语
WOS记录号WOS:000848612300003
资助机构National Natural Science Foundation of China ; Graduate Innovation Fund of Jilin University ; Opening Project of the Key Laboratory of CNC Equipment Reliability, Ministry of Education, Jilin University ; Fundamental Research Funds for the Central Universities (2019-2022)
其他责任者Huang, Hu
源URL[http://dspace.imech.ac.cn/handle/311007/89985]  
专题力学研究所_非线性力学国家重点实验室
作者单位1.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China
2.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China;
3.Keio Univ, Fac Sci & Technol, Dept Mech Engn, Yokohama 2238522, Japan;
4.Jilin Univ, Electron Microscopy Ctr, Sch Mech & Aerosp Engn, Key Lab CNC Equipment Reliabil,Minist Educ, Changchun 130022, Jilin, Peoples R China;
推荐引用方式
GB/T 7714		 Qian, Yongfeng,Zhang, Di,Hong, Jing,et al. Microstructure and mechanical properties of SiC particle reinforced Zr-based metallic glass surface composite layers produced by laser alloying[J]. SURFACE & COATINGS TECHNOLOGY,2022,446:10.
APA Qian, Yongfeng.,Zhang, Di.,Hong, Jing.,Zhang, Lin.,蒋敏强.,...&Yan, Jiwang.(2022).Microstructure and mechanical properties of SiC particle reinforced Zr-based metallic glass surface composite layers produced by laser alloying.SURFACE & COATINGS TECHNOLOGY,446,10.
MLA Qian, Yongfeng,et al."Microstructure and mechanical properties of SiC particle reinforced Zr-based metallic glass surface composite layers produced by laser alloying".SURFACE & COATINGS TECHNOLOGY 446(2022):10.

入库方式： OAI收割

来源：力学研究所

浏览0
下载0
收藏0
其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。