A study on the method of quality control by restraining the influence of curvature in curved surface polishing
文献类型：期刊论文
| 作者 | Zhou, Jie; Zhan, Jianming; Liu, Jing; Chen, Chin-Yin; Hu, Liyong |
| 刊名 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
 |
| 出版日期 | 2021 |
| 卷号 | 116期号:11-12页码:3677-3686 |
| 关键词 | MATERIAL REMOVAL |
| 英文摘要 | This paper proposes a method of quality for the uneven removal caused by the change of the radius of curvature in the aspheric surface polishing and finishing. This method uses a polishing disk and a bonnet as polishing devices, two kinds of aspheric parts as workpieces with a concave surface and a convex surface respectively. By deriving the model of pressure and velocity at different positions, the equation between dwell time and curvature radius on the elliptical generatrix of aspheric workpiece could be obtained from the famous Preston equation on polishing material removal. According to the dwell time on the different path points, the movement of the robot could be controlled. In this way, only the dwell time of the path points on the elliptical generatrix needs to be calculated, rather than the entire aspheric surface. By measuring the values of surface roughness in the polishing of concave and convex aspheric surfaces, the experimental results verify that the method could improve the processing efficiency. |
| 源URL | [http://ir.nimte.ac.cn/handle/174433/21725]  |
| 专题 | 中国科学院宁波材料技术与工程研究所 2021专题_期刊论文 |
| 作者单位 | Zhan, JM (corresponding author), Zhejiang Univ, Ningbo Inst Technol, Ningbo 315100, Peoples R China. |
| 推荐引用方式 GB/T 7714 | Zhou, Jie,Zhan, Jianming,Liu, Jing,et al. A study on the method of quality control by restraining the influence of curvature in curved surface polishing[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2021,116(11-12):3677-3686. |
| APA | Zhou, Jie,Zhan, Jianming,Liu, Jing,Chen, Chin-Yin,&Hu, Liyong.(2021).A study on the method of quality control by restraining the influence of curvature in curved surface polishing.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,116(11-12),3677-3686. |
| MLA | Zhou, Jie,et al."A study on the method of quality control by restraining the influence of curvature in curved surface polishing".INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 116.11-12(2021):3677-3686. |
入库方式： OAI收割
来源：宁波材料技术与工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。