Structure and tribocorrosion behavior of TiAlCN coatings with different Al contents in artificial seawater by multi-arc ion plating
文献类型:期刊论文
作者 | Liu, Ke; Ma, Fuliang; Lou, Ming; Dong, Minpeng; Zhu, Yebiao; Wang, Yongxin; Wu, Xuedong; Liu, Xiang; Li, Jinlong |
刊名 | SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES |
出版日期 | 2021 |
卷号 | 9期号:4 |
关键词 | CHEMICAL-VAPOR-DEPOSITION THIN-FILMS MECHANICAL-PROPERTIES CORROSION-RESISTANCE STAINLESS-STEEL TI6AL4V CARBON MICROSTRUCTURE PERFORMANCE TI-6AL-4V |
英文摘要 | In this work, titanium aluminum carbonitride (TiAlCN) coatings with different aluminum (Al) contents were prepared on Ti-6Al-4V alloys using reactive co-sputtering in multi-arc ion plating system. The role of Al content (14.4 at.%-21.5 at.%) on the structure, mechanical properties and tribocorrosion behavior of TiAlCN coatings were studied. According to the x-ray diffraction (XRD) and High-resolution transition electron microscope (HRTEM) results, the TiAlCN coatings possess a nanocomposite structure composed of nanocrystalline TiN/TiC/AlN embedded in an amorphous carbon matrix. When the Al content is low (14.4 at.%), the coatings exhibits ultra-high hardness (42.6 GPa). Further increase of the Al content, the hardness of the coating reduced, as the formation of amorphous carbon increased in the coating (16.8 and 21.5 at.%). In addition, the coating with 14.4 at.% Al content also reveal better tribocorrosion performance in artificial seawater than other high Al content coatings as well as the substrate. This is owing to the denser structure can prevent the penetration of the corrosive media thus limits the material loss. Moreover, the material loss in tribocorrosion experiment is not only caused by the summation of pure corrosion and pure wear loss, but also the synergism between corrosion and wear takes a large proportion of the total volume loss. |
源URL | [http://ir.nimte.ac.cn/handle/174433/21285] |
专题 | 2021专题_期刊论文 |
作者单位 | 1.Li, JL (corresponding author), Chinese Acad Sci, Ningbo Inst Mat Technol & Engn, Key Lab Marine Mat & Related Technol, Zhejiang Key Lab Marine Mat & Protect Technol, Ningbo 315201, Peoples R China. 2.Liu, X (corresponding author), Kunming Univ Sci & Technol, Sch Mat Sci & Engn, Kunming 650093, Yunnan, Peoples R China. 3.Li, JL (corresponding author), Univ Chinese Acad Sci, Ctr Mat Sci & Optoelect Engn, Beijing 100049, Peoples R China. |
推荐引用方式 GB/T 7714 | Liu, Ke,Ma, Fuliang,Lou, Ming,et al. Structure and tribocorrosion behavior of TiAlCN coatings with different Al contents in artificial seawater by multi-arc ion plating[J]. SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES,2021,9(4). |
APA | Liu, Ke.,Ma, Fuliang.,Lou, Ming.,Dong, Minpeng.,Zhu, Yebiao.,...&Li, Jinlong.(2021).Structure and tribocorrosion behavior of TiAlCN coatings with different Al contents in artificial seawater by multi-arc ion plating.SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES,9(4). |
MLA | Liu, Ke,et al."Structure and tribocorrosion behavior of TiAlCN coatings with different Al contents in artificial seawater by multi-arc ion plating".SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES 9.4(2021). |
入库方式: OAI收割
来源:宁波材料技术与工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。