Microstructure and Size-Dependent Mechanical Properties of Additively Manufactured 316L Stainless Steels Produced by Laser Metal Deposition
文献类型：期刊论文
| 作者 | Jiang HZ(蒋华臻); Chen QS(陈启生) ; Li ZY(李正阳); Chen, Xin-Ye; Sun, Hui-Lei; Yao, Shao-Ke; Fang, Jia-Huiyu; Hu, Qi-Yun; Yao SK(姚少科); 房佳汇钰
|
| 刊名 | ACTA METALLURGICA SINICA-ENGLISH LETTERS
 |
| 出版日期 | 2022-08-16 |
| 关键词 | Additive manufacturing Laser metal deposition 316L stainless steel Tensile properties Slimness ratio |
| ISSN号 | 1006-7191 |
| DOI | 10.1007/s40195-022-01445-z |
| 英文摘要 | Metal additive manufacturing (AM), as a disruptive technology in the field of fabricating metallic parts, has shown its ability to design component with macrostructural complexity. However, some of these functionally complex structures typically contain a wide range of feature sizes, namely, the characteristic length of elements in AM-produced components can vary from millimeter to meter-scale. The requisite for controlling performance covers nearly six orders of magnitude, from the microstructure to macro scale structure. Understanding the mechanical variation with the feature size is of critical importance for topology optimization engineers to make required design decisions. In this work, laser metal deposition (LMD) is adopted to manufacture 316L stainless steel (SS) samples. To evaluate the effect of defects and specimen size on mechanical properties of LMD-produced samples, five rectangular sample sizes which ranged from non-standard miniature size to ASTM standard sub-sized samples were machined from the block. Tensile test reveals that the mechanical properties including yield strength (YS), ultimate tensile strength (UTS), and elongation to failure (epsilon(f)) are almost the identical for samples with ASTM standard size. Whilst, relatively lower YS and UTS values, except for epsilon(f), are observed for samples with a miniature size compared with that of ASTM standard samples. The epsilon(f) values of LMD-produced 316L SS samples show a more complex trend with sample size, and are affected by three key influencing factors, namely, slimness ratio, cluster of pores, and occupancy location of lack of fusion defects. In general, the epsilon(f) values exhibit a decreasing trend with the increase of slimness ratio. Microstructure characterization reveals that the LMD-produced 316L samples exhibited a high stress status at low angle grain boundaries, whilst its location changed to high angle grain boundaries after plastic deformation. The grain size refinement and austenite-to-martensite phase transformation occurred during plastic deformation might be responsible for the very high YS and UTS attained in this study. The experimental works carried out in this study is expected to provide a guideline for evaluating the mechanical properties of LMD-produced parts with complex structure, where critical parameter such as a certain slimness ratio has to be considered. |
| 学科主题 | Metallurgy & Metallurgical Engineering |
| 分类号 | 二类/Q1 |
| 语种 | 英语 |
| WOS记录号 | WOS:000841081800003 |
| 资助机构 | National Natural Science Foundation of China [11772344] |
| 其他责任者 | Chen, QS ; Li, ZY (corresponding author), Chinese Acad Sci, Inst Mech, Beijing 100190, Peoples R China. ; Chen, QS ; Li, ZY (corresponding author), Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100190, Peoples R China. |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/90139]  |
| 专题 | 力学研究所_国家微重力实验室 宽域飞行工程科学与应用中心 |
| 作者单位 | 1.DE Testing JIANGSU Co LTD, Changzhou 213164, Peoples R China 2.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100190, Peoples R China 3.[Chen, Qi-Sheng 4.Chinese Acad Sci, Inst Mech, Beijing 100190, Peoples R China 5.Fang, Jia-Huiyu 6.Yao, Shao-Ke 7.Sun, Hui-Lei 8.Li, Zheng-Yang 9.Chen, Qi-Sheng 10.[Jiang, Hua-Zhen |
| 推荐引用方式 GB/T 7714 | Jiang HZ,Chen QS,Li ZY,et al. Microstructure and Size-Dependent Mechanical Properties of Additively Manufactured 316L Stainless Steels Produced by Laser Metal Deposition[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2022. |
| APA | 蒋华臻.,陈启生.,李正阳.,Chen, Xin-Ye.,Sun, Hui-Lei.,...&房佳汇钰.(2022).Microstructure and Size-Dependent Mechanical Properties of Additively Manufactured 316L Stainless Steels Produced by Laser Metal Deposition.ACTA METALLURGICA SINICA-ENGLISH LETTERS. |
| MLA | 蒋华臻,et al."Microstructure and Size-Dependent Mechanical Properties of Additively Manufactured 316L Stainless Steels Produced by Laser Metal Deposition".ACTA METALLURGICA SINICA-ENGLISH LETTERS (2022). |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。