中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Boron adsorption using a new boron-selective hybrid gel and thecommercial resin D564

文献类型:期刊论文

作者Li, Quan; Liu, Haining; Qing, Binju; Ye, Xiushen; Wu, Zhijian; Ge, Fei; Guo, Min
刊名COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
出版日期2009
卷号341期号:1-3页码:118-126
关键词Boron Adsorption Boron-selective resin Hybrid gel Adsorption
ISSN号0927-7757
语种A new hybrid gel with boron-selective functional groups is prepared with tetraethoxysilane (TEOS), (3-glycidoxypropyl)trimethoxysilane (GPTMS), and a new precursor (W) synthesized from GPTMS and N-methylglucamine (MG). We investigate the boron adsorption onto the hybrid gel and the commercial resin D564 in aqueous solution by varying the initial boron concentration, pH, ionic strength, and temperature. Adsorption of both the hybrid gel and the D564 can be described by the second-order kinetics and the hybrid gel shows the lower second-order rate constant and the initial adsorption rate than the commercial resin. A maximum boron adsorption occurs at pH 4-9, which can be explained by the adsorption suppression by H(+) ions at low pH and the weakened complexation by electrostatic repulsion at high pH. Ionic strength of the Solution affects both the adsorption kinetics and thermodynamics, and it has a more pronounced effect on the kinetics of the hybrid gel than the D564. For both the hybrid gel and the D564, adsorption was found to be a chemisorption, which may be more advantageous in removal of boron from water than physisorption due to a higher adsorption capacity and better selectivity. Compared with other boron-selective adsorbents, the boron-selective hybrid gel in this study is easy to prepare, and has a good mechanical strength and an adsorption capacity (1.15 mmol g(-1)). (C) 2009 Elsevier B.V. All rights reserved. A new hybrid gel with boron-selective functional groups is prepared with tetraethoxysilane (TEOS), (3-glycidoxypropyl)trimethoxysilane (GPTMS), and a new precursor (W) synthesized from GPTMS and N-methylglucamine (MG). We investigate the boron adsorption onto the hybrid gel and the commercial resin D564 in aqueous solution by varying the initial boron concentration, pH, ionic strength, and temperature. Adsorption of both the hybrid gel and the D564 can be described by the second-order kinetics and the hybrid gel shows the lower second-order rate constant and the initial adsorption rate than the commercial resin. A maximum boron adsorption occurs at pH 4-9, which can be explained by the adsorption suppression by H(+) ions at low pH and the weakened complexation by electrostatic repulsion at high pH. Ionic strength of the Solution affects both the adsorption kinetics and thermodynamics, and it has a more pronounced effect on the kinetics of the hybrid gel than the D564. For both the hybrid gel and the D564, adsorption was found to be a chemisorption, which may be more advantageous in removal of boron from water than physisorption due to a higher adsorption capacity and better selectivity. Compared with other boron-selective adsorbents, the boron-selective hybrid gel in this study is easy to prepare, and has a good mechanical strength and an adsorption capacity (1.15 mmol g(-1)). (C) 2009 Elsevier B.V. All rights reserved.
公开日期2013-10-07
源URL[http://ir.isl.ac.cn/handle/363002/2105]  
专题青海盐湖研究所_青海盐湖研究所知识仓储
青海盐湖研究所_盐湖资源与化学实验室
青海盐湖研究所_管理部门
推荐引用方式
GB/T 7714
Li, Quan,Liu, Haining,Qing, Binju,et al. Boron adsorption using a new boron-selective hybrid gel and thecommercial resin D564[J]. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS,2009,341(1-3):118-126.
APA Li, Quan.,Liu, Haining.,Qing, Binju.,Ye, Xiushen.,Wu, Zhijian.,...&Guo, Min.(2009).Boron adsorption using a new boron-selective hybrid gel and thecommercial resin D564.COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS,341(1-3),118-126.
MLA Li, Quan,et al."Boron adsorption using a new boron-selective hybrid gel and thecommercial resin D564".COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS 341.1-3(2009):118-126.

入库方式: OAI收割

来源:青海盐湖研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。