Study on assembly pressure of molten carbonate fuel cells based on in-situ sintered model
文献类型：期刊论文
| 作者 | Wang, Pengjie1,2; Liu, Sa1,2; Zhou, Li1; Shao, Zhigang1; Yi, Baolian1 |
| 刊名 | international journal of hydrogen energy
 |
| 出版日期 | 2013-05-20 |
| 卷号 | 38期号:15页码:6503-6508 |
| 关键词 | Molten carbon fuel cells Environment-friendly Sintered model Matrices |
| 产权排序 | 1,1 |
| 通讯作者 | 周利 ; 邵志刚 |
| 英文摘要 | an in-situ sintered model of molten carbonate fuel cells (mcfcs) with environment-friendly aqueous matrices was proposed in order to optimize the performance of mcfc unit cell. the optimum assembly pressure range was settled based on the sintered model. moreover, an environment-friendly aqueous alpha-lialo2 matrix was fabricated by a tape-casting process using distilled water as solvent and was applied into mcfc successfully. the obtained single drying green sheet had a thickness of 200-300 mu m, no defects, and good workability. the microstructure of the alpha-lialo2 required in an mcfc was obtained using this method. in this work, the mcfc using the matrices was assembled and tested. the output power density could reach 149.2 mw cm(-2) at the current density of 200 ma cm(-2) when the assemble pressure was 7.01 mpa. copyright (c) 2013, hydrogen energy publications, llc. published by elsevier ltd. all rights reserved. |
| WOS标题词 | science & technology ; physical sciences ; technology |
| 学科主题 | 物理化学 |
| 类目[WOS] | chemistry, physical ; electrochemistry ; energy & fuels |
| 研究领域[WOS] | chemistry ; electrochemistry ; energy & fuels |
| 关键词[WOS] | electrolyte matrix ; performance ; stability ; lialo2 |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000319233000025 |
| 公开日期 | 2013-10-11 |
| 源URL | [http://159.226.238.44/handle/321008/117605]  |
| 专题 | 大连化学物理研究所_中国科学院大连化学物理研究所 |
| 作者单位 | 1.Chinese Acad Sci, Dalian Inst Chem Phys, Fuel Cell Syst & Engn Lab, Dalian 116023, Liaoning, Peoples R China 2.Chinese Acad Sci, Grad Univ, Beijing 100049, Peoples R China |
| 推荐引用方式 GB/T 7714 | Wang, Pengjie,Liu, Sa,Zhou, Li,et al. Study on assembly pressure of molten carbonate fuel cells based on in-situ sintered model[J]. international journal of hydrogen energy,2013,38(15):6503-6508. |
| APA | Wang, Pengjie,Liu, Sa,Zhou, Li,Shao, Zhigang,&Yi, Baolian.(2013).Study on assembly pressure of molten carbonate fuel cells based on in-situ sintered model.international journal of hydrogen energy,38(15),6503-6508. |
| MLA | Wang, Pengjie,et al."Study on assembly pressure of molten carbonate fuel cells based on in-situ sintered model".international journal of hydrogen energy 38.15(2013):6503-6508. |
入库方式： OAI收割
来源：大连化学物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。