Carbon fiber modified by attapulgite for preparing ultra-high molecular weight polyethylene composite with enhanced thermal, mechanical and tribological properties
文献类型：期刊论文
| 作者 | Zhaojie Meng1,2; Yunxia Wang2 ; Hao Liu2; Fengyuan Yan2
|
| 刊名 | Polymers for Advanced Technologies
 |
| 出版日期 | 2022 |
| 期号 | 33页码:4142–4151 |
| 关键词 | attapulgite, carbon fiber, interface, UHMWPE |
| 英文摘要 | The attapulgite nanofibers (ATP) were grafted on the surface of carbon fibers (CF) by polyetherimide (PEI) with long chain to reinforce the thermal, mechanical properties, and fretting wear resistance of ultra-high molecular weight polyethylene. The results showed that the surface roughness of CF modified by ATP nanofibers were highly increased. Meanwhile, the thermal, mechanical, and tribological properties of the ATP-PEI-CF/UPE composite were significantly improved, especially the enhance-ment in heat distortion temperature, compressive modulus, and wear resistance. The improvement mechanisms of the corresponding properties were mainly attributed to the increase of mechanical interlocking of the matrix and the hybrid fillers, which could not only transfer the load and heat applied to the matrix to the fibers, but also impede the friction damage of the matrix during fretting wear process. |
| 源URL | [http://ir.licp.cn/handle/362003/29493]  |
| 专题 | 兰州化学物理研究所_固体润滑国家重点实验室 |
| 通讯作者 | Zhaojie Meng; Fengyuan Yan |
| 作者单位 | 1.中国科学院大学 2.State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China |
| 推荐引用方式 GB/T 7714 | Zhaojie Meng,Yunxia Wang,Hao Liu,et al. Carbon fiber modified by attapulgite for preparing ultra-high molecular weight polyethylene composite with enhanced thermal, mechanical and tribological properties[J]. Polymers for Advanced Technologies,2022(33):4142–4151. |
| APA | Zhaojie Meng,Yunxia Wang,Hao Liu,&Fengyuan Yan.(2022).Carbon fiber modified by attapulgite for preparing ultra-high molecular weight polyethylene composite with enhanced thermal, mechanical and tribological properties.Polymers for Advanced Technologies(33),4142–4151. |
| MLA | Zhaojie Meng,et al."Carbon fiber modified by attapulgite for preparing ultra-high molecular weight polyethylene composite with enhanced thermal, mechanical and tribological properties".Polymers for Advanced Technologies .33(2022):4142–4151. |
入库方式： OAI收割
来源：兰州化学物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。