中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
首页 机构 成果 学者
  
  1. CAS IR Grid
  2. 合肥物质科学研究院
  3. 中国科学院合肥物质科学研究院
Generic Cutting Force Modeling with Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling

文献类型：期刊论文

作者Gao, Shuaishuai2; Duan, Xianyin3; Zhu, Kunpeng1; Zhang, Yu3
刊名MICROMACHINES
出版日期2022-11-01
卷号13
关键词cutting force mechanical modeling micro-end milling tool edge radius tool flank wear tool runout
DOI10.3390/mi13111805
通讯作者Duan, Xianyin(xyduan@wust.edu.cn) ; Zhu, Kunpeng(zhukp@iamt.ac.cn)
英文摘要Accurate cutting force prediction is crucial in improving machining precision and surface quality in the micro-milling process, in which tool wear and runout are essential factors. A generic analytic cutting force model considering the effect of tool edge radius on tool flank wear and tool runout in the micro-end milling process is proposed. Based on the analytic modeling of the cutting part of the cutting edge in the end face of the micro-end mill bottom, the actual radius model of the worn tool is established, considering the tool edge radius and tool flank wear. The tool edge radius, tool wear, tool runout, trochoidal trajectories of the current cutting edge, and all cutting edges in the previous cycle are comprehensively considered in the instantaneous uncut chip thickness calculation and the cutter-workpiece engagement determination. The cutting force coefficient model including tool wear is established. A series of milling experiments are performed to verify the accuracy and effectiveness of the proposed cutting force model. The results show that the predicted cutting forces are in good agreement with the experimental cutting forces, and it is necessary to consider tool wear in the micro-milling force modeling. The results indicate that tool wear has a significant influence on the cutting forces and cutting force coefficients in the three directions, and the influences of tool wear on the axial cutting force and axial force coefficient are the largest, respectively. The proposed cutting force model can contribute to real-time machining process monitoring, cutting parameters optimization and ensuring machining quality.
WOS关键词UNDEFORMED CHIP THICKNESS ; PART II ; PREDICTION ; OPERATIONS ; STEEL
资助项目National Natural Science Foundation of China[52005201]
WOS研究方向Chemistry ; Science & Technology - Other Topics ; Instruments & Instrumentation ; Physics
语种英语
出版者MDPI
WOS记录号WOS:000881112600001
资助机构National Natural Science Foundation of China
源URL[http://ir.hfcas.ac.cn:8080/handle/334002/130142]  
专题中国科学院合肥物质科学研究院
通讯作者Duan, Xianyin; Zhu, Kunpeng
作者单位1.Chinese Acad Sci, Hefei Inst Phys Sci, Inst Intelligent Machines, Hefei 230031, Peoples R China
2.Cent China Normal Univ, Sch Math & Stat, Wuhan 430079, Peoples R China
3.Wuhan Univ Sci & Technol, Minist Educ, Key Lab Met Equipment & Control Technol, Wuhan 430081, Peoples R China
推荐引用方式
GB/T 7714		 Gao, Shuaishuai,Duan, Xianyin,Zhu, Kunpeng,et al. Generic Cutting Force Modeling with Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling[J]. MICROMACHINES,2022,13.
APA Gao, Shuaishuai,Duan, Xianyin,Zhu, Kunpeng,&Zhang, Yu.(2022).Generic Cutting Force Modeling with Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling.MICROMACHINES,13.
MLA Gao, Shuaishuai,et al."Generic Cutting Force Modeling with Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling".MICROMACHINES 13(2022).

入库方式： OAI收割

来源：合肥物质科学研究院

浏览0
下载0
收藏0
其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。