Microstructure evolution and yield strength improvement of a low carbon medium manganese steel experienced intercritical annealing, pre-straining and tempering
文献类型:期刊论文
作者 | Bi, Nannan3,4; Liang, Juhua4; Wang, Xingfu4; Kang, Tao1,2; Han, Fusheng4 |
刊名 | MATERIALS CHARACTERIZATION |
出版日期 | 2022-12-01 |
卷号 | 194 |
ISSN号 | 1044-5803 |
关键词 | Medium manganese steel Intercritical annealing Pre -strain Microstructure evolution Mechanical property |
DOI | 10.1016/j.matchar.2022.112439 |
通讯作者 | Liang, Juhua(liangjuhua0721@126.com) ; Han, Fusheng(fshan@issp.ac.cn) |
英文摘要 | The microstructure evolution and mechanical properties of a 0.15C1.2Si10Mn0.5 V medium manganese steel after intercritical annealing, pre-straining and tempering treatment are systematically analyzed. An intercritical annealing yields a microstructure containing ultrafine gamma + alpha coexisting structure while final tempering reduces martensitic supersaturation, which is beneficial to the ductility of the steel. The applied pre-strains between the two processes cause a part of unstable banded austenite in hot rolled state prematurely to transform into lath martensite that divides the coarse banded austenite into smaller ones. When the pre-strain is 0.02, there are about 21% strain-induced martensite produced in the microstructure and the steel exhibits the best comprehensive mechanical properties with the yield strength of 1264 MPa, tensile strength of 1506 MPa and total elongation of 19%. Actually, the increase in yield strength under pre-strains should be ascribed to dislocation strengthening in the strain-induced martensite and the precipitation strengthening of vanadium carbides during the deformation and subsequent tempering. |
WOS关键词 | MECHANICAL-PROPERTIES ; RETAINED AUSTENITE ; TENSILE BEHAVIOR ; MARTENSITE ; PRECIPITATION ; DUCTILITY ; TEMPERATURE ; STABILITY ; TOUGHNESS ; MODEL |
资助项目 | National Natural Science Foundation of China ; Natural Science Foundation of Anhui Province of China ; Science and Technology Program of Inner Mongolia Autonomous Region ; [52001304] ; [2008085QE259] ; [2108085ME142] ; [2022YFDZ0004] |
WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
语种 | 英语 |
出版者 | ELSEVIER SCIENCE INC |
WOS记录号 | WOS:000882077600003 |
资助机构 | National Natural Science Foundation of China ; Natural Science Foundation of Anhui Province of China ; Science and Technology Program of Inner Mongolia Autonomous Region |
源URL | [http://ir.hfcas.ac.cn:8080/handle/334002/130355] |
专题 | 中国科学院合肥物质科学研究院 |
通讯作者 | Liang, Juhua; Han, Fusheng |
作者单位 | 1.China North Vehicle Res Inst, Beijing 100072, Peoples R China 2.Univ Sci & Technol Beijing, Collaborat Innovat Ctr Steel Technol, Beijing 100083, Peoples R China 3.Univ Sci & Technol China, Hefei 230026, Anhui, Peoples R China 4.Chinese Acad Sci, Inst Solid State Phys, Hefei Inst Phys Sci, Key Lab Mat Phys, Hefei 230031, Anhui, Peoples R China |
推荐引用方式 GB/T 7714 | Bi, Nannan,Liang, Juhua,Wang, Xingfu,et al. Microstructure evolution and yield strength improvement of a low carbon medium manganese steel experienced intercritical annealing, pre-straining and tempering[J]. MATERIALS CHARACTERIZATION,2022,194. |
APA | Bi, Nannan,Liang, Juhua,Wang, Xingfu,Kang, Tao,&Han, Fusheng.(2022).Microstructure evolution and yield strength improvement of a low carbon medium manganese steel experienced intercritical annealing, pre-straining and tempering.MATERIALS CHARACTERIZATION,194. |
MLA | Bi, Nannan,et al."Microstructure evolution and yield strength improvement of a low carbon medium manganese steel experienced intercritical annealing, pre-straining and tempering".MATERIALS CHARACTERIZATION 194(2022). |
入库方式: OAI收割
来源:合肥物质科学研究院
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。