Design and Verification of Calorimeter for CFETR Neutral Beam Injection System Prototype with Negative Ion Source
文献类型：期刊论文
| 作者 | Tao, Ling1 ; Xie, Yuanlai2; Hu, Chundong2; Xu, Yongjian2; Yi, Wei2; Tang, Ning2
|
| 刊名 | FUSION SCIENCE AND TECHNOLOGY
 |
| 出版日期 | 2022-05-26 |
| 关键词 | Negative neutral beam injection calorimeter heat transfer enhancement swirl tube mass flow distribution |
| ISSN号 | 1536-1055 |
| DOI | 10.1080/15361055.2022.2050131 |
| 通讯作者 | Tao, Ling(taoling@njust.edu.cn) |
| 英文摘要 | Currently, a neutral beam injection (NBI) system prototype with a 200-keV negative ion source, called the negative neutral beam injection (NNBI) system, is under construction for the China Fusion Engineering Test Reactor Project. In the NNBI system, the calorimeter is an extremely important high-heat-flux component, and its panels have to withstand a heat flux density of up to dozens of MW/m(2) under some extreme conditions; thus, its efficient heat transfer enhancement design and the corresponding supporting structural design are most important, especially under the condition of a 3600-s long pulse. According to the detailed design requirements of the NNBI system, an overall design scheme of the calorimeter based on the heat transfer enhancement structure of the swirl tube (SW for short) is proposed in this paper. By using the gas-liquid two-phase flow boiling model and the supporting structure's finite element model, the heat transfer performance of the heat exchange module, the mass flow distribution and pressure drop of the entire cooling circuit of the component, and the strength of the support structure are evaluated to verify the feasibility of the design scheme. Finally, based on the proposed design scheme, the detailed design of the temperature monitor system, which has high reliability and economy, is completed. This research provides important theoretical and engineering support for the structural development of the calorimeter for the NNBI verification prototype and will also provide references for the design and development of other internal components of large-scale fusion devices. |
| WOS关键词 | CRITICAL-HEAT-FLUX ; RESEARCH-AND-DEVELOPMENT ; TWISTED-TAPE INSERTS ; SCREW TUBE ; SWIRL-FLOW ; MODEL ; MITICA ; WATER |
| 资助项目 | National Natural Science Foundation of China[11605234] ; National Natural Science Foundation of China[11702292] ; National Key R&D Program of China[2017YFE300103] ; National Key R&D Program of China[2017YFE300101] ; Comprehensive Research Facility for Fusion Technology Program of China[2018-000052-73-01-001228] |
| WOS研究方向 | Nuclear Science & Technology |
| 语种 | 英语 |
| WOS记录号 | WOS:000801153100001 |
| 出版者 | TAYLOR & FRANCIS INC |
| 资助机构 | National Natural Science Foundation of China ; National Key R&D Program of China ; Comprehensive Research Facility for Fusion Technology Program of China |
| 源URL | [http://ir.hfcas.ac.cn:8080/handle/334002/130987]  |
| 专题 | 中国科学院合肥物质科学研究院 |
| 通讯作者 | Tao, Ling |
| 作者单位 | 1.Nanjing Univ Sci & Technol, Sch Energy & Power Engn, Nanjing 210094, Peoples R China 2.Chinese Acad Sci, Inst Plasma Phys, Hefei 230031, Peoples R China |
| 推荐引用方式 GB/T 7714 | Tao, Ling,Xie, Yuanlai,Hu, Chundong,et al. Design and Verification of Calorimeter for CFETR Neutral Beam Injection System Prototype with Negative Ion Source[J]. FUSION SCIENCE AND TECHNOLOGY,2022. |
| APA | Tao, Ling,Xie, Yuanlai,Hu, Chundong,Xu, Yongjian,Yi, Wei,&Tang, Ning.(2022).Design and Verification of Calorimeter for CFETR Neutral Beam Injection System Prototype with Negative Ion Source.FUSION SCIENCE AND TECHNOLOGY. |
| MLA | Tao, Ling,et al."Design and Verification of Calorimeter for CFETR Neutral Beam Injection System Prototype with Negative Ion Source".FUSION SCIENCE AND TECHNOLOGY (2022). |
入库方式： OAI收割
来源：合肥物质科学研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。