Microstructure and mechanical properties of in-situ formed ZrC nanoparticles dispersion-strengthened tungsten alloy
文献类型：期刊论文
| 作者 | Cheng, X.1,2; Jing, K.1,2; Xie, Z. M.2; Liu, R.1,2 ; Wu, X. B.2; Wang, X. P.2; Fang, Q. F.1,2; Liu, C. S.2
|
| 刊名 | INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
 |
| 出版日期 | 2022-09-01 |
| 卷号 | 107 |
| ISSN号 | 0263-4368 |
| 关键词 | Tungsten Dispersion strengthening Microstructure Dissolution-precipitation Mechanical properties |
| DOI | 10.1016/j.ijrmhm.2022.105912 |
| 通讯作者 | Liu, R.(liurui@issp.ac.cn) ; Fang, Q. F.(qffang@issp.ac.cn) |
| 英文摘要 | W-Zr-C alloy with nanoscale ZrC particles dispersion was fabricated via powder metallurgy method using W, ZrH2 and nanoscale C powders as starting materials. The average size of in-situ formed particles is 55 nm. The smaller particles in the grain interior are dominantly ZrC particles. Zr decomposed from ZrH2 can also react with impurity oxygen to form ZrO2 particles and reduce the detrimental effects of oxygen on grain boundaries. The asswaged W-Zr-C alloy is ductile at 200 degrees C, and the ultimate tensile strength and total elongation (TE) at 300 degrees C are 643.5 MPa and 23.5%, respectively. After annealing at 1400 degrees C, the UTS at 300 degrees C of W-Zr-C alloy is still as high as 611.4 MPa and the TE is 33.2%. The recrystallization start temperature of the as-swaged W-Zr-C alloy is between 1400 and 1500 degrees C, which is 200 degrees C higher than that of pure W. The in-situ formation of nanoscale second-phase particles via the dissolution-precipitation mechanism provides a feasible strategy for improving the low-temperature toughness and high-temperature stability of tungsten alloys. |
| WOS关键词 | PLASMA-FACING COMPONENTS ; HELIUM-COOLED DIVERTOR ; THERMAL-STABILITY ; ZIRCONIUM CARBIDE ; RESISTANCE ; PARTICLES |
| 资助项目 | National Key Research and Development Program of China[2019YFE03120001] ; National Key Research and Development Program of China[2017YFE0302400] ; National Key Research and Development Program of China[2017YFA0402800] ; National Natural Science Foundation of China[51671184] ; National Natural Science Foundation of China[11735015] ; National Natural Science Foundation of China[51971213] ; National Natural Science Foundation of China[52173303] ; National Natural Science Foundation of China[52171084] ; HIRFL User Project[HIR19PY006] ; HFIPS Director's Fund, Chinese Academy of Sciences[YZJJ202102] ; HFIPS Director's Fund, Chinese Academy of Sciences[YZJJZX202012] |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| 出版者 | ELSEVIER SCI LTD |
| WOS记录号 | WOS:000811224900004 |
| 资助机构 | National Key Research and Development Program of China ; National Natural Science Foundation of China ; HIRFL User Project ; HFIPS Director's Fund, Chinese Academy of Sciences |
| 源URL | [http://ir.hfcas.ac.cn:8080/handle/334002/131293]  |
| 专题 | 中国科学院合肥物质科学研究院 |
| 通讯作者 | Liu, R.; Fang, Q. F. |
| 作者单位 | 1.Univ Sci & Technol China, Hefei 230026, Peoples R China 2.Chinese Acad Sci, Inst Solid State Phys, Key Lab Mat Phys, HFIPS, Hefei 230031, Peoples R China |
| 推荐引用方式 GB/T 7714 | Cheng, X.,Jing, K.,Xie, Z. M.,et al. Microstructure and mechanical properties of in-situ formed ZrC nanoparticles dispersion-strengthened tungsten alloy[J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS,2022,107. |
| APA | Cheng, X..,Jing, K..,Xie, Z. M..,Liu, R..,Wu, X. B..,...&Liu, C. S..(2022).Microstructure and mechanical properties of in-situ formed ZrC nanoparticles dispersion-strengthened tungsten alloy.INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS,107. |
| MLA | Cheng, X.,et al."Microstructure and mechanical properties of in-situ formed ZrC nanoparticles dispersion-strengthened tungsten alloy".INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS 107(2022). |
入库方式： OAI收割
来源：合肥物质科学研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。