Joint Optimization of Production Lot Sizing and Preventive Maintenance Threshold Based on Nonlinear Degradation
文献类型:期刊论文
作者 | Qu, Li2; Liao, Junli2; Gao, Kaiye1,2; Yang, Li3 |
刊名 | APPLIED SCIENCES-BASEL
![]() |
出版日期 | 2022-09-01 |
卷号 | 12期号:17页码:12 |
关键词 | lot sizing preventive maintenance degradation modeling joint optimization |
DOI | 10.3390/app12178638 |
英文摘要 | In a manufacturing system, lot sizing and maintenance are interdependent and interact with each other. Few studies jointly investigated production lot sizing and maintenance management considering system degradation. However, during the production process, the system and critical component performance will undergo inevitable degradation over time. For example, equipment wears out due to both its own internal causes and the external environment. To monitor the degradation process, interval inspection is usually performed to obtain information about the system degradation and nonlinear degradation is more general. Thus, based on the nonlinear degradation of the production system, this study developed a joint optimization model of production lot sizing and preventive maintenance (PM) thresholds with the goal of maximizing profit per unit of time. The maintenance decision follows the control limit principle, i.e., the choice between preventive maintenance (PM), corrective maintenance (CM), or neither (do nothing) is based on the magnitude of degradation. A simulation algorithm is proposed to obtain the optimal lot-sizing allocation and PM thresholds. The effectiveness of this joint optimization model algorithm is illustrated by numerical examples and the results show that the maximum profit per unit time can be obtained by reasonably formulating PM thresholds and production lot sizing. |
资助项目 | National Natural Science Foundation of China[72001027] ; National Natural Science Foundation of China[72071005] ; National Natural Science Foundation of China[72001078] ; Chinese Post Doctoral Science Foundation[270514] ; R&D Program of Beijing Municipal Education Commission[KM202111232007] |
WOS研究方向 | Chemistry ; Engineering ; Materials Science ; Physics |
语种 | 英语 |
WOS记录号 | WOS:000850959600001 |
出版者 | MDPI |
源URL | [http://ir.amss.ac.cn/handle/2S8OKBNM/60992] ![]() |
专题 | 中国科学院数学与系统科学研究院 |
通讯作者 | Gao, Kaiye; Yang, Li |
作者单位 | 1.Chinese Acad Sci, Acad Math & Syst Sci, Beijing 100045, Peoples R China 2.Beijing Informat Sci & Technol Univ, Sch Econ & Management, Beijing 100124, Peoples R China 3.Beihang Univ, Sch Reliabil & Syst Engn, Beijing 100191, Peoples R China |
推荐引用方式 GB/T 7714 | Qu, Li,Liao, Junli,Gao, Kaiye,et al. Joint Optimization of Production Lot Sizing and Preventive Maintenance Threshold Based on Nonlinear Degradation[J]. APPLIED SCIENCES-BASEL,2022,12(17):12. |
APA | Qu, Li,Liao, Junli,Gao, Kaiye,&Yang, Li.(2022).Joint Optimization of Production Lot Sizing and Preventive Maintenance Threshold Based on Nonlinear Degradation.APPLIED SCIENCES-BASEL,12(17),12. |
MLA | Qu, Li,et al."Joint Optimization of Production Lot Sizing and Preventive Maintenance Threshold Based on Nonlinear Degradation".APPLIED SCIENCES-BASEL 12.17(2022):12. |
入库方式: OAI收割
来源:数学与系统科学研究院
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。