A comprehensive characterization of virgin and recycled 316L powders during laser powder bed fusion
文献类型：期刊论文
| 作者 | Lu, Chao2; Zhang, Ruihua2,3; Xiao, Mengzhi2; Wei, Xiaohong3; Yin, Yan4; Qu, Yuebo2; Li, Hui2; Liu, Pengyu2; Qiu, Xiaopan1; Guo, Tieming4 |
| 刊名 | JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
 |
| 出版日期 | 2022-05-01 |
| 卷号 | 18页码:2292-2309 |
| ISSN号 | 2238-7854 |
| 关键词 | Laser powder bed fusion Powder recycling Powder characterization Oxidation Magnetization |
| DOI | 10.1016/j.jmrt.2022.03.125 |
| 英文摘要 | The primary constraints hindering the widespread adoption of laser powder bed fusion (LPBF) are expensive raw materials, internal defects, difficulty in controlling the quality and stability, and lack of consistency in the powder feedstock. The spatters induced by the violent interaction between the laser and powder can be deposited on the unmelted powder bed, and if not effectively separated by sieving, they would pose a significant detriment to the characteristics and consistency of the recycled powders. In this work, a systematic investigation of the evolution mechanism of 316L powders after 10 and 30 successive recycling in the LPBF process was presented. Firstly, the variation mechanism of particle size distribution and morphology of 316L powder and the generation mechanism of heterogeneous particles were studied. Then, changes in microstructure and hardness trends were characterized. Finally, we emphasized the changes of chemical composition, phase composition, magnetic properties, and the formation mechanism of oxide spots. The results show that the circulation had significant effects on the physical properties, phase transformation, mechanical properties, and magnetic properties of the 316L powders, but had minor effects on the chemical composition, surface and cross-sectional microstructure. In addition, a large number of oddly shaped, large-diameter spatters were identified in the recycled powders, which could not be separated effectively by sieving, and the formation mechanism of the spatters were elaborated. Based on the comprehensive high temperature oxidation thermodynamics and experimental results, it was concluded that the circular oxide spots on the spatter surface were a composite of multiple oxides of Mn and Si. Further, it was also shown that the ferrite content, XRD peak characteristics, and magnetic properties in the recycled powders were governed by the droplet solidification modes, which in turn is determined by the chemical composition and cooling rates. (c) 2022 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). |
| WOS关键词 | STAINLESS-STEEL ; MECHANICAL-PROPERTIES ; HEAT-TREATMENT ; METAL POWDERS ; BEHAVIOR ; MICROSTRUCTURE ; DENUDATION ; TI-6AL-4V ; SURFACE ; REUSE |
| 资助项目 | Yangjiang City Science and Technology Plan Project[2018057] ; Yangjiang City Science and Technology Plan Project[SDZX2019038] ; Yangjiang City Science and Technology Plan Project[SDZX2020009] ; Yangjiang City Science and Technology Plan Project[2018002] ; Yangjiang City Science and Technology Plan Project[52161007] |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| 出版者 | ELSEVIER |
| WOS记录号 | WOS:000793121000002 |
| 资助机构 | Yangjiang City Science and Technology Plan Project |
| 源URL | [http://ir.ipe.ac.cn/handle/122111/53460]  |
| 专题 | 中国科学院过程工程研究所 |
| 通讯作者 | Lu, Chao; Zhang, Ruihua |
| 作者单位 | 1.Chinese Acad Sci, Inst Proc Engn, State Key Lab Multiphase Complex Syst, Beijing 100190, Peoples R China 2.Cent Iron & Steel Res Inst, Beijing 100081, Peoples R China 3.Hardware Knife Cut Ind Technol Res Inst Yangjiang, Yangjiang 529533, Peoples R China 4.Lanzhou Univ Technol, Sch Mat Sci & Engn, Lanzhou 730050, Peoples R China |
| 推荐引用方式 GB/T 7714 | Lu, Chao,Zhang, Ruihua,Xiao, Mengzhi,et al. A comprehensive characterization of virgin and recycled 316L powders during laser powder bed fusion[J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,2022,18:2292-2309. |
| APA | Lu, Chao.,Zhang, Ruihua.,Xiao, Mengzhi.,Wei, Xiaohong.,Yin, Yan.,...&Guo, Tieming.(2022).A comprehensive characterization of virgin and recycled 316L powders during laser powder bed fusion.JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,18,2292-2309. |
| MLA | Lu, Chao,et al."A comprehensive characterization of virgin and recycled 316L powders during laser powder bed fusion".JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 18(2022):2292-2309. |
入库方式： OAI收割
来源：过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。