The Behavior of CO2 Supersonic Jets in the Converter Slag-Splashing Process
文献类型:期刊论文
作者 | Zhang, Han1; Yuan, Zhangfu1; Mei, Lu1; Peng, Xuan1; Liu, Ke1; Zhao, Hongxin1,2 |
刊名 | JOURNAL OF SUSTAINABLE METALLURGY
![]() |
出版日期 | 2022-10-12 |
页码 | 13 |
关键词 | CO2 utilization Carbon dioxide Slag splashing Supersonic jet Numerical simulation |
ISSN号 | 2199-3823 |
DOI | 10.1007/s40831-022-00607-8 |
英文摘要 | A numerical model was developed to investigate the possibility of using CO2 to replace conventional N-2 for the converter slag-splashing process and, thus, promote the recycling of CO2 in the steel industry. The validity of the numerical model was demonstrated using one-dimensional isentropic flow theory and experimental data. By comparing with N-2 and O-2, it was found that CO2 has a lower velocity and dynamic pressure, higher temperature at the exit of the oxygen lance, and the difference between the three gases decreases gradually with the increasing of axial distance. The oxygen lance is required to have excellent stirring and splashing performance simultaneously for the CO2 slag-splashing process. The five-hole oxygen lance with a central nozzle combines the advantages of single-hole and four-hole oxygen lances, with higher impact force, slower decay of dynamic pressure, higher impact area, and more tremendous average turbulent kinetic energy at a low lance position, providing a better choice for slag splashing. Decreasing the axial distance, increasing the CO2 stagnation pressure, and raising the CO2 preheating temperature could improve the CO(2 )jet performance by different degrees. This work provides a theoretical basis for the application of CO2 in the converter slag-splashing process. [GRAPHICS] . |
WOS关键词 | CARBON-DIOXIDE ; CAPTURE ; BOF ; DESIGN ; LANCE ; IRON |
资助项目 | National Natural Science Foundation of China[51974022] |
WOS研究方向 | Science & Technology - Other Topics ; Metallurgy & Metallurgical Engineering |
语种 | 英语 |
WOS记录号 | WOS:000866309200003 |
出版者 | SPRINGER |
资助机构 | National Natural Science Foundation of China |
源URL | [http://ir.ipe.ac.cn/handle/122111/54956] ![]() |
专题 | 中国科学院过程工程研究所 |
通讯作者 | Zhao, Hongxin |
作者单位 | 1.Univ Sci & Technol Beijing, Collaborat Innovat Ctr Steel Technol, 30 Xueyuan Rd, Beijing 100083, Peoples R China 2.Chinese Acad Sci, Natl Engn Res Ctr Green Recycling Strateg Met Res, Inst Proc Engn, 1 North 2nd St, Beijing 100190, Peoples R China |
推荐引用方式 GB/T 7714 | Zhang, Han,Yuan, Zhangfu,Mei, Lu,et al. The Behavior of CO2 Supersonic Jets in the Converter Slag-Splashing Process[J]. JOURNAL OF SUSTAINABLE METALLURGY,2022:13. |
APA | Zhang, Han,Yuan, Zhangfu,Mei, Lu,Peng, Xuan,Liu, Ke,&Zhao, Hongxin.(2022).The Behavior of CO2 Supersonic Jets in the Converter Slag-Splashing Process.JOURNAL OF SUSTAINABLE METALLURGY,13. |
MLA | Zhang, Han,et al."The Behavior of CO2 Supersonic Jets in the Converter Slag-Splashing Process".JOURNAL OF SUSTAINABLE METALLURGY (2022):13. |
入库方式: OAI收割
来源:过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。