Digital light processing additive manufacturing of thin dental porcelain veneers
文献类型:期刊论文
作者 | Wang, Shuo1; Peng, Lian1,4; Song, Chengnan2; Wang, Chengyu3 |
刊名 | JOURNAL OF THE EUROPEAN CERAMIC SOCIETY |
出版日期 | 2023-03-01 |
卷号 | 43期号:3页码:1161-1167 |
ISSN号 | 0955-2219 |
关键词 | 3D printing Digital light processing Porcelain veneer Sintering |
DOI | 10.1016/j.jeurceramsoc.2022.10.080 |
英文摘要 | Digital light processing (DLP) 3D printing technology was applied to manufacture thin dental porcelain veneers. The prepared thin dental porcelain veneers showed excellent translucency and appearance. The median and mean particle sizes of the printed glass powders were 10.11 mu m and 12.03 mu m, respectively, with a unimodal distribution. The green glass compacts were printed layer by layer, with an individual layer thickness of 50 mu m. The results showed that, according to the thermal expansion coefficient (TEC) and the thermogravimetry/differential scanning calorimetry (TG/DSC), the debinding procedure of the green glass compacts was annealed at 320 degrees C for 120 min and 570 degrees C for 120 min, respectively. The results of the classical sintering kinetics models and SEM examination demonstrated that the glass compacts were sintered at 790 degrees C for 5 min. The flexural strength and the chemical solubility of the sintered glasses were 132.58 +/- 25.83 MPa and 18 mu m.cm(-2), respectively. Both flexural strength and chemical solubility met ISO 6872 criteria. |
WOS关键词 | SILICA GLASS ; CERAMIC VENEERS ; FABRICATION ; SCAFFOLDS ; POWDER |
资助项目 | Lang Fang Technological Service Center of Green Industry ; [LF-IPE-Z2018A003] |
WOS研究方向 | Materials Science |
语种 | 英语 |
出版者 | ELSEVIER SCI LTD |
WOS记录号 | WOS:000891020300005 |
资助机构 | Lang Fang Technological Service Center of Green Industry |
源URL | [http://ir.ipe.ac.cn/handle/122111/55999] |
专题 | 中国科学院过程工程研究所 |
通讯作者 | Peng, Lian |
作者单位 | 1.Chinese Acad Sci, Inst Proc Engn, State Key Lab Multiphase Complex Syst, Beijing 100190, Peoples R China 2.Productiv Ctr Bldg Mat Ind, Beijing 100024, Peoples R China 3.Beijing Normal Univ, Sch Stat, Beijing 100091, Peoples R China 4.Chinese Acad Sci, Inst Proc Engn, State Key Lab Multiphase Complex Syst, POB 353, Beijing 100190, Peoples R China |
推荐引用方式 GB/T 7714 | Wang, Shuo,Peng, Lian,Song, Chengnan,et al. Digital light processing additive manufacturing of thin dental porcelain veneers[J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY,2023,43(3):1161-1167. |
APA | Wang, Shuo,Peng, Lian,Song, Chengnan,&Wang, Chengyu.(2023).Digital light processing additive manufacturing of thin dental porcelain veneers.JOURNAL OF THE EUROPEAN CERAMIC SOCIETY,43(3),1161-1167. |
MLA | Wang, Shuo,et al."Digital light processing additive manufacturing of thin dental porcelain veneers".JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 43.3(2023):1161-1167. |
入库方式: OAI收割
来源:过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。