Inversion analysis of the shear strength parameters for a high loess slope in the limit state
文献类型:期刊论文
作者 | Lin, Xiao-yan; Zhang, Lin-fan; Yang, Ze; Li, Ping; Li, Tong-lu |
刊名 | JOURNAL OF MOUNTAIN SCIENCE
![]() |
出版日期 | 2021 |
卷号 | 18期号:1页码:252-264 |
关键词 | Loess High slope Shear strength Inversion SLOPE W |
ISSN号 | 1672-6316 |
DOI | 10.1007/s11629-020-6142-z |
英文摘要 | It is difficult to obtain reliable shear strength parameters for the stability analysis and evaluation of high loess slopes. Hence, this paper determines slope elements and physical parameter of 79 slopes with heights of [40, 120] m based on the measured loess slopes in the Ganquan and Tonghuang subregions of northern Shaanxi Province, China. In the limit state of the loess slope (stability factor F-s is 1.0), a fitting equation for the slope height and width is established. Then, the model is developed by stability analysis software-SLOPE/W, and the comprehensive shear strength parameters corresponding to different slope heights of the high slope in the study area are obtained by inversion using the Morgenstern-Price method. The results show that when the height of the slope increases, the cohesion c increases in the soil, and the internal friction angle phi decreases. This change is consistent with the characteristics reflected in the composition and physical properties of the slopes, and the comprehensive strength parametric curves are very similar between the Ganquan subregion and the Tonghuang subregion. A landslide that occurred in Miaodian-zaitou of Jingyang County, Shaanxi Province, is selected to verify this inversion method, and the results show that the calculated shear strength parameters of the inversion are consistent with the measured value of the actual slope. |
语种 | 英语 |
WOS记录号 | WOS:000603539500003 |
源URL | [http://ir.imde.ac.cn/handle/131551/57160] ![]() |
专题 | Journal of Mountain Science_Journal of Mountain Science-2021_Vol18 No.1 |
推荐引用方式 GB/T 7714 | Lin, Xiao-yan,Zhang, Lin-fan,Yang, Ze,et al. Inversion analysis of the shear strength parameters for a high loess slope in the limit state[J]. JOURNAL OF MOUNTAIN SCIENCE,2021,18(1):252-264. |
APA | Lin, Xiao-yan,Zhang, Lin-fan,Yang, Ze,Li, Ping,&Li, Tong-lu.(2021).Inversion analysis of the shear strength parameters for a high loess slope in the limit state.JOURNAL OF MOUNTAIN SCIENCE,18(1),252-264. |
MLA | Lin, Xiao-yan,et al."Inversion analysis of the shear strength parameters for a high loess slope in the limit state".JOURNAL OF MOUNTAIN SCIENCE 18.1(2021):252-264. |
入库方式: OAI收割
来源:成都山地灾害与环境研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。