3D Printing-Induced Fine Particle and Volatile Organic Compound Emission: An Emerging Health Risk
文献类型:期刊论文
作者 | Min, Ke; Li, Yong; Wang, Dingyi; Chen, Bo; Ma, Ming; Hu, Ligang; Liu, Qian; Jiang, Guibin |
刊名 | ENVIRONMENTAL SCIENCE & TECHNOLOGY LETTERS |
出版日期 | 2021-08-10 |
卷号 | 8期号:8页码:616-625 |
ISSN号 | 2328-8930 |
英文摘要 | 3D printing, a technology that allows the layer-bylayer construction of complex 3D structures from a range of precursor materials, has shown promising applicability in construction and in the automotive, aerospace, defense, biomedicine, and consumer electronics industries. A key concern, however, is the health effects and safety problems due to its emission of fine particles (PM2.5, particles with aerodynamic diameters of <2.5 mu m) and volatile organic compounds (VOCs). Understanding the characteristics and relevant toxicological effects of 3D printing-emitted PM2.5 and VOCs is important for its health risk assessment and safe application. Here, we thoroughly review the emission levels of PM2.5 and VOCs in workplaces, the simulation tests of laboratory environment, and the in vitro and in vivo evaluation of 3D printing-emitted PM2.5 and VOCs. Meanwhile, standard protocols are recommended in the assessment of hazard risks of 3D printers to obtain better comparability of the results. Some safety guidance for 3D printer users is also provided. Finally, we point out the current research gaps and discuss the challenges encountered in this field. This review will be beneficial for the understanding of the health risks of emitted PM2.5 and VOCs from 3D printing for the development of safer 3D printing technologies. |
WOS研究方向 | Engineering, Environmental ; Environmental Sciences |
源URL | [http://ir.rcees.ac.cn/handle/311016/45634] |
专题 | 生态环境研究中心_环境化学与生态毒理学国家重点实验室 |
作者单位 | 1.Chinese Acad Sci, Res Ctr Ecoenvironm Sci, State Key Lab Environm Chem & Ecotoxicol, Beijing 100085, Peoples R China 2.Cent South Univ Forestry & Technol, Fac Life Sci & Technol, Natl Engn Lab Appl Forest Ecol Technol Southern C, Changsha 410004, Peop 3.Jianghan Univ, Inst Environm & Hlth, Wuhan 430056, Peoples R China 4.Univ Chinese Acad Sci, Beijing 100190, Peoples R China 5.Hunan Normal Univ, Key Lab Phytochem R&D Hunan Prov, Minist Educ, Key Lab Chem Biol & Tradit Chinese Med Res, Changsha 410081, Peoples R China |
推荐引用方式 GB/T 7714 | Min, Ke,Li, Yong,Wang, Dingyi,et al. 3D Printing-Induced Fine Particle and Volatile Organic Compound Emission: An Emerging Health Risk[J]. ENVIRONMENTAL SCIENCE & TECHNOLOGY LETTERS,2021,8(8):616-625. |
APA | Min, Ke.,Li, Yong.,Wang, Dingyi.,Chen, Bo.,Ma, Ming.,...&Jiang, Guibin.(2021).3D Printing-Induced Fine Particle and Volatile Organic Compound Emission: An Emerging Health Risk.ENVIRONMENTAL SCIENCE & TECHNOLOGY LETTERS,8(8),616-625. |
MLA | Min, Ke,et al."3D Printing-Induced Fine Particle and Volatile Organic Compound Emission: An Emerging Health Risk".ENVIRONMENTAL SCIENCE & TECHNOLOGY LETTERS 8.8(2021):616-625. |
入库方式: OAI收割
来源:生态环境研究中心
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。