Failure Mechanism Research on Bending Fretting Fatigue of 6061-T6 Aluminum Alloy by Experiment and Finite Element Method
文献类型：期刊论文
| 作者 | Ding, Jun; Yang, Long; Liu W(刘巍)
|
| 刊名 | MATERIALS
 |
| 出版日期 | 2023-06-02 |
| 卷号 | 16期号:11页码:4161 |
| 关键词 | fretting fatigue critical plane approach 6061-T6 aluminum alloy fatigue life |
| DOI | 10.3390/ma16114161 |
| 英文摘要 | The fatigue failure mechanism of bending fretting for cyclic softening material 6061-T6 aluminum alloy was researched by experiment and finite element method. The influence of cyclic load on bending fretting fatigue was researched and the damage characteristics under different cycles was discussed experimentally though SEM images. In the simulation, a normal load transformation method was employed to obtain a simplified two-dimensional model used for simulating the bending fretting fatigue from a three-dimensional model. An advanced constitutive equation with the Abdel-Ohno rule and isotropic hardening evolution was transplanted into ABAQUS by UMAT subroutine to consider the ratchetting behavior and cyclic softening characteristics. The peak stain distributions under various cyclic loads were discussed. Additionally, the bending fretting fatigue lives and crack initiation locations referring to a critical volume method were estimated using the Smith-Watson-Topper critical plane approach and reasonable results were obtained. |
| 分类号 | 二类 |
| WOS研究方向 | Chemistry, Physical ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering ; Physics, Applied ; Physics, Condensed Matter |
| 语种 | 英语 |
| WOS记录号 | WOS:001003567700001 |
| 资助机构 | National Natural Science Foundation of China [11402219] ; Open Fund of State Key Laboratory of Applied Optics [SKLAO2020001A01] |
| 其他责任者 | Ding, J (corresponding author), Southwest Petr Univ, Sch Mech Engn, Chengdu 610500, Peoples R China. ; Liu, W (corresponding author), Chinese Acad Sci, Inst Mech, Beijing 100864, Peoples R China. |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/92380]  |
| 专题 | 力学研究所_国家微重力实验室 |
| 作者单位 | 1.{Liu Wei} Chinese Acad Sci Inst Mech Beijing 100864 Peoples R China 2.{Ding Jun, Yang Long} Southwest Petr Univ Sch Mech Engn Chengdu 610500 Peoples R China |
| 推荐引用方式 GB/T 7714 | Ding, Jun,Yang, Long,Liu W. Failure Mechanism Research on Bending Fretting Fatigue of 6061-T6 Aluminum Alloy by Experiment and Finite Element Method[J]. MATERIALS,2023,16(11):4161. |
| APA | Ding, Jun,Yang, Long,&刘巍.(2023).Failure Mechanism Research on Bending Fretting Fatigue of 6061-T6 Aluminum Alloy by Experiment and Finite Element Method.MATERIALS,16(11),4161. |
| MLA | Ding, Jun,et al."Failure Mechanism Research on Bending Fretting Fatigue of 6061-T6 Aluminum Alloy by Experiment and Finite Element Method".MATERIALS 16.11(2023):4161. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。