Erosion Performance of TiAlSiN Coatings Prepared by High-Power Pulsed Magnetron Sputtering
文献类型：期刊论文
| 作者 | Li, Hua ; Li, Liuhe; Li, Duoduo; Tang, Ling; Luo, Yang; Li G(李光); Wu, Yuehan; Li GD(李国栋); Xu Y(许亿); Han, Mingyue
|
| 刊名 | METALS
 |
| 出版日期 | 2023-07-01 |
| 卷号 | 13期号:7页码:1306 |
| 关键词 | erosion resistance phase composition TiAlSiN coating discharge voltages |
| DOI | 10.3390/met13071306 |
| 英文摘要 | Erosion seriously threatens the safety of high-speed rotating mechanical components in very harsh service environments, particularly for lightweight titanium alloy matrix material. In order to improve the erosion resistance of titanium alloy, TiAlSiN coatings with different phase compositions are deposited on TC6 titanium alloy using a high-power pulse magnetron sputtering discharge (HPPMS) system under various discharge voltages. The componential and microstructural evolution as well as mechanical properties of the TiAlSiN coatings are evaluated by X-ray diffraction, scanning electron microscopy, and nanoindentation, respectively. The erosion performance relative to titanium alloy is investigated by a sand blasting tester. With the increase in discharge voltage from -500 to -600 V, the peak of discharge current increases from 105 to 225 A. The prepared TiAlSiN coatings show a shift of the preferred crystallographic orientation from (220) to (200), but all of them have a dense nanocomposite structure. Their hardness (H) and elastic modulus (E) gradually increase before decreasing, arriving at maximum values of 35.34 and 360.5 GPa at -570 V. The erosion resistance of the TiAlSiN coatings dependent on the discharge voltage is consistent with the H/E ratio change. The TiAlSiN coatings prepared at -560 V exhibit the optimal erosion resistance, which is 15 times that of the TC6 substrate. The erosion behavior of the coatings is positively correlated with their hardness and toughness. Adjusting the discharge voltage of the HPPMS pulse is finally proved to be an effective way of tailoring the coating phase compositions to improve the erosion resistance of titanium alloy. |
| 分类号 | 二类 |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:001036699600001 |
| 资助机构 | National Natural Science of China [NSFC 12275014] ; National Science and Technology Major Project [2017-VII-0012-0108, 2017-VII-0003-0096] |
| 其他责任者 | Li, LH ; Han, MY (corresponding author), Beihang Univ, Sch Mech Engn & Automat, Dept Mat Proc & Control Engn, Beijing 100000, Peoples R China. |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/92543]  |
| 专题 | 宽域飞行工程科学与应用中心 |
| 作者单位 | 1.{Huang, Kai} Chinese Acad Sci, Inst Elect Engn, Beijing 100000, Peoples R China 2.{Feng, Pengbo, Xu, Xiaolei} Beige Weifang Intelligent Technol Co Ltd, Weifang 261000, Peoples R China 3.{Li, Hua, Li, Liuhe, Li, Duoduo, Tang, Ling, Luo, Yang, Wu, Yuehan, Han, Mingyue} Beihang Univ, Sch Mech Engn & Automat, Dept Mat Proc & Control Engn, Beijing 100000, Peoples R China 4.{Li, Guodong} Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100000, Peoples R China 5.{Li, Guang, Li, Guodong, Xu, Yi} Chinese Acad Sci, Inst Mech, Beijing 100000, Peoples R China 6.{Gu, Jiabin} Beijing Jiaotong Univ, Coll Mech Elect & Control Engn, Beijing 100000, Peoples R China |
| 推荐引用方式 GB/T 7714 | Li, Hua,Li, Liuhe,Li, Duoduo,et al. Erosion Performance of TiAlSiN Coatings Prepared by High-Power Pulsed Magnetron Sputtering[J]. METALS,2023,13(7):1306. |
| APA | Li, Hua.,Li, Liuhe.,Li, Duoduo.,Tang, Ling.,Luo, Yang.,...&Xu Y.(2023).Erosion Performance of TiAlSiN Coatings Prepared by High-Power Pulsed Magnetron Sputtering.METALS,13(7),1306. |
| MLA | Li, Hua,et al."Erosion Performance of TiAlSiN Coatings Prepared by High-Power Pulsed Magnetron Sputtering".METALS 13.7(2023):1306. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。