Stiffness Analysis and Verification of Hydraulic Supporting Units for In-Situ Optical Testing of a 500 mm-Diameter Mirror
文献类型：期刊论文
| 作者 | D. Y. Dong; D. Zhou; Y. H. Jiang; L. Q. Wang; C. Li; H. F. Hu; Y. J. Guan and M. H. Gao |
| 刊名 | Machines
 |
| 出版日期 | 2022 |
| 卷号 | 10期号:10页码:12 |
| DOI | 10.3390/machines10100828 |
| 英文摘要 | A hydraulic in-situ support system is commonly used in the optical testing of mirrors, since it is convenient to unload the gravity of a mirror to be measured without the risk of being turned over or moved to another place. The existing supporting structures have several disadvantages, such as the problem of the output force deviating from the axis, being sensitive to machining loads, its flexible components easily leading to fatigue damage by cyclic loads and so on. A new single-cylinder hydraulic supporting unit with a ball hinge was proposed, analyzed and verified in this paper. A finite simulation based on four structural parameters' effect on the stiffness of the proposed hydraulic supporting unit showed that increasing the thickness, elastic modulus and convolution width of the rolling diaphragm and decreasing the height of the rolling diaphragm to some extent was beneficial to a high stiffness. Moreover, it could be concluded from experiments that, in order to decrease the stiffness dispersion, the air ratio should be as low as possible and the values of the initial pressure and press speed should be as high as possible. These results are conducive to maintain a high stiffness of HSU to bear the processing load and reduce the low-order aberrations of mirror which provide a reference for future hydraulic supporting unit designs. |
| URL标识 | 查看原文 |
| 语种 | 英语 |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/67112]  |
| 专题 | 中国科学院长春光学精密机械与物理研究所 |
| 推荐引用方式 GB/T 7714 | D. Y. Dong,D. Zhou,Y. H. Jiang,et al. Stiffness Analysis and Verification of Hydraulic Supporting Units for In-Situ Optical Testing of a 500 mm-Diameter Mirror[J]. Machines,2022,10(10):12. |
| APA | D. Y. Dong.,D. Zhou.,Y. H. Jiang.,L. Q. Wang.,C. Li.,...&Y. J. Guan and M. H. Gao.(2022).Stiffness Analysis and Verification of Hydraulic Supporting Units for In-Situ Optical Testing of a 500 mm-Diameter Mirror.Machines,10(10),12. |
| MLA | D. Y. Dong,et al."Stiffness Analysis and Verification of Hydraulic Supporting Units for In-Situ Optical Testing of a 500 mm-Diameter Mirror".Machines 10.10(2022):12. |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。