Study of Material Color Influences on Mechanical Characteristics of Fused Deposition Modeling Parts
文献类型：期刊论文
| 作者 | G. Gao; F. Xu; J. M. Xu and Z. Y. Liu |
| 刊名 | Materials
 |
| 出版日期 | 2022 |
| 卷号 | 15期号:19页码:15 |
| DOI | 10.3390/ma15197039 |
| 英文摘要 | The objective of the present work is to evaluate the influence of material color on mechanical properties of fused deposition modeling (FDM) parts. The performance of the products is evaluated by testing eight different colors of acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA) material in terms of tensile strength, compressive strength, and flexural strength. The analysis of data shows a significant difference in mechanical characteristics of prints depending on filament color. For different colors, these three strengths almost follow the same rising and falling tendency. In order to explore the relationship between mechanical strengths and filament colors, the color-mixing theory and the least-squares method are adopted to fit the best ratio coefficients of different color combinations. Results are presented showing that the strength value (e.g., tensile) of the mixed color can be evaluated through that of primary colors by fitting the other strength (e.g., compressive or flexural). It is shown that the predicted value is always no more than 7% error compared with the actual strength, in spite of two-color or three-color mixtures. An additional confirmation test with seven colored PLA filaments from different suppliers was conducted to focus on the extensibility. The outcomes show the maximum fitting errors of strengths for mixed colors in all cases are within 5%, proving the effectiveness and applicability of this predicted approach. This study can bring a detailed analysis that enables better estimation of the function of material color and contributes to improving the property of FDM printed products for consumers by choosing the suitable filament color. |
| URL标识 | 查看原文 |
| 语种 | 英语 |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/67118]  |
| 专题 | 中国科学院长春光学精密机械与物理研究所 |
| 推荐引用方式 GB/T 7714 | G. Gao,F. Xu,J. M. Xu and Z. Y. Liu. Study of Material Color Influences on Mechanical Characteristics of Fused Deposition Modeling Parts[J]. Materials,2022,15(19):15. |
| APA | G. Gao,F. Xu,&J. M. Xu and Z. Y. Liu.(2022).Study of Material Color Influences on Mechanical Characteristics of Fused Deposition Modeling Parts.Materials,15(19),15. |
| MLA | G. Gao,et al."Study of Material Color Influences on Mechanical Characteristics of Fused Deposition Modeling Parts".Materials 15.19(2022):15. |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。