A Survey of the Influence of Process Parameters on Mechanical Properties of Fused Deposition Modeling Parts
文献类型：期刊论文
| 作者 | G. Gao; F. Xu; J. M. Xu; G. H. Tang and Z. Y. Liu |
| 刊名 | Micromachines
 |
| 出版日期 | 2022 |
| 卷号 | 13期号:4页码:28 |
| DOI | 10.3390/mi13040553 |
| 英文摘要 | Due to the availability of materials and low cost for production, fused deposition modeling is becoming the most widely used additive manufacturing (AM) technology. However, the reasonable choice of process parameters for FDM is a significant task that directly affects the performance of the printed part. Therefore, it is necessary to investigate the influences of various process parameters on the quality characteristics of the components. The objectives of this study are to thoroughly review the current state of research that characterizes, estimates the effects of process parameters on mechanical properties, and summarizes the conclusions of existing works. In addition, some general issues of the presented research are summarized, and the need for future development is also emphasized. Finally, the research proposes several areas that deserve further study in this field. |
| URL标识 | 查看原文 |
| 语种 | 英语 |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/67140]  |
| 专题 | 中国科学院长春光学精密机械与物理研究所 |
| 推荐引用方式 GB/T 7714 | G. Gao,F. Xu,J. M. Xu,et al. A Survey of the Influence of Process Parameters on Mechanical Properties of Fused Deposition Modeling Parts[J]. Micromachines,2022,13(4):28. |
| APA | G. Gao,F. Xu,J. M. Xu,&G. H. Tang and Z. Y. Liu.(2022).A Survey of the Influence of Process Parameters on Mechanical Properties of Fused Deposition Modeling Parts.Micromachines,13(4),28. |
| MLA | G. Gao,et al."A Survey of the Influence of Process Parameters on Mechanical Properties of Fused Deposition Modeling Parts".Micromachines 13.4(2022):28. |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。