Fringe projection profilometry method with high efficiency, precision, and convenience: theoretical analysis and development
文献类型：期刊论文
| 作者 | S. Z. Lv; D. W. Tang; X. J. Zhang; D. Y. Yang; W. J. Deng and K. M. Qian |
| 刊名 | Optics Express
 |
| 出版日期 | 2022 |
| 卷号 | 30期号:19页码:33515-33537 |
| ISSN号 | 1094-4087 |
| DOI | 10.1364/oe.467502 |
| 英文摘要 | Fringe projector profilometry (FPP) is an important three-dimensional (3D) measure-ment technique, especially when high precision and speed are required. Thus, theoretical interrogation is critical to provide deep understanding and possible improvement of FPP. By dividing an FPP measurement process into four steps (system calibration, phase measurement, pixel correspondence, and 3D reconstruction), we give theoretical analysis on the entire process except for the extensively studied calibration step. Our study indeed reveals a series of important system properties, to the best of our knowledge, for the first time: (i) in phase measurement, the optimal and worst fringe angles are proven perpendicular and parallel to epipolar line, respectively, and can be considered as system parameters and can be directly made available during traditional calibration, highlighting the significance of the epipolar line; (ii) in correspondence, when two sets of fringes with different fringe orientations are projected, the highest correspondence precision can be achieved with arbitrary orientations as long as these two orientations are perpendicular to each other; (iii) in reconstruction, a higher reconstruction precision is given by the 4-equation methods, while we notice that the 3-equation methods are almost dominatingly used in literature. Based on these theoretical results, we propose a novel FPP measurement method which (i) only projects one set of fringes with optimal fringe angle to explicitly work together with the epipolar line for precise pixel correspondence; (ii) for the first time, the optimal fringe angle is determined directly from the calibration parameters, instead of being measured; (iii) uses 4 equations for precise 3D reconstruction but we can remove one equation which is equivalent to an epipolar line, making it the first algorithm that can use 3-equation solution to achieve 4-equation precision. Our method is efficient (only one set of fringe patterns is required in projection and the speed is doubled in reconstruction), precise (in both pixel correspondence and 3D reconstruction), and convenient (the computable optimal fringe angle and a closed-form 3-equation solution). We also believe that our work is insightful in revealing fundamental FPP properties, provides a more reasonable measurement for practice, and thus is beneficial to further FPP studies. |
| URL标识 | 查看原文 |
| 语种 | 英语 |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/67258]  |
| 专题 | 中国科学院长春光学精密机械与物理研究所 |
| 推荐引用方式 GB/T 7714 | S. Z. Lv,D. W. Tang,X. J. Zhang,et al. Fringe projection profilometry method with high efficiency, precision, and convenience: theoretical analysis and development[J]. Optics Express,2022,30(19):33515-33537. |
| APA | S. Z. Lv,D. W. Tang,X. J. Zhang,D. Y. Yang,&W. J. Deng and K. M. Qian.(2022).Fringe projection profilometry method with high efficiency, precision, and convenience: theoretical analysis and development.Optics Express,30(19),33515-33537. |
| MLA | S. Z. Lv,et al."Fringe projection profilometry method with high efficiency, precision, and convenience: theoretical analysis and development".Optics Express 30.19(2022):33515-33537. |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。