Advanced composites with multi-functionality enhanced by nanoparticles
文献类型：会议论文
| 作者 | Ye, Lin2; Zhang, Dong Hai1; Wang, Dong3 |
| 出版日期 | 1905-07-05 |
| 会议日期 | July 14, 2013 - July 17, 2013 |
| 会议地点 | Sathorn-Taksin, Bangkok, Thailand |
| 关键词 | Hot pressing - Laminated composites - Tensile strength - Damage detection - Fracture toughness |
| 卷号 | 747 |
| DOI | 10.4028/www.scientific.net/AMR.747.19 |
| 页码 | 19-22 |
| 英文摘要 | Continuous fibre (carbon or glass) composite laminates with an epoxy matrix modified by nanoparticles (nanosilica of 25 nm or nanocarbon of 35 nm) were fabricated using a vacuum assisted resin infusion technique, aided by hot pressing, that produces high performance composites of a fibre fraction over 60 vol%. The presence of nanoparticles enhances fibre-matrix adhesion, the transverse tensile strength, the unidirectional compression strength, and mode I interlaminar fracture toughness. In particular, the GF/EP composites with the conductive nanoparticles allow the in-situ monitoring of damage (e.g. delamination) growth and impact damage assessment using a novel method of electrical resistivity tomography. 漏 (2013) Trans Tech Publications, Switzerland. |
| 资助机构 | Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland |
| 会议录 | 4th International Conference on Multi-Functional Materials and Structures, MFMS 2013
 |
| 学科主题 | Nanoparticles |
| 源URL | [http://ir.ipe.ac.cn/handle/122111/59471]  |
| 作者单位 | 1.State Key Laboratory of Multi-phase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China 2.Centre for Advanced Materials Technology, School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, NSW 2006, Australia 3.Beijing Aeronautical Science and Technology Research Institute, Beijing 100083, China |
| 推荐引用方式 GB/T 7714 | Ye, Lin,Zhang, Dong Hai,Wang, Dong. Advanced composites with multi-functionality enhanced by nanoparticles[C]. 见:. Sathorn-Taksin, Bangkok, Thailand. July 14, 2013 - July 17, 2013. |
入库方式： OAI收割
来源：过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。