Combustion modeling of CFB boiler furnace based on an Euler-Euler approach
文献类型：会议论文
| 作者 | Xiao, Xianbin2; Wang, Wei1; Yang, Hairui2; Zhang, Hai2; Zhang, Jiansheng2; Liu, Qing2; Junfu, L.U.2; Yue, Guangxi2 |
| 出版日期 | 1905-06-27 |
| 会议日期 | May 22, 2005 - May 25, 2005 |
| 会议地点 | Toronto, ON, Canada |
| 关键词 | Combustion - Hydrodynamics - Kinetic theory - Optimization |
| DOI | 10.1115/fbc2005-78040 |
| 页码 | 277-285 |
| 英文摘要 | For the better design of large scale CFB boilers, reliable multi-dimensional modeling which can be used to predict the heterogeneous distributions of gas and solid concentration as well as temperature in the furnace is necessary and demanded. A model describing the complex combustion process in a CFB boiler furnace has been developed. The model consists of several essential sub-parts: the hydrodynamics of the bed, combustion of fuel, and overall mass balance of the furnace. In the computational fluid dynamics (CFD) study on hydrodynamics in a CFB boiler, the Euler-Euler approach is used, in which both gas and solid phases are considered as interpenetrating continua with the interaction through drag and energy dissipation caused by particle fluctuation. The constitutive equations for solid phase are derived from the kinetic theory of granular flow (KTGF). Some simplifications of the complicated theoretical equations with empirical correlations are adopted, to save computing time and skip the currently unknown phenomena. Drag coefficient between gas phase and solid phase is modified by the energy-minimization multi-scale (EMMS) principle. A simplified description of reaction process is also adopted. The present model was applied to predict the hydrodynamic and combustion behaviors in a commercial 135 MWe CFB boiler. Some primary results are obtained and discussed in comparison with the measured data. Prediction results agree with the experimental data in general, confirming the correctness of the model. More reliable experiments are needed for the model improvement in the future. Copyright 漏 2005 by ASME. |
| 资助机构 | American Society of Mechanical Engineers |
| 会议录 | 18th International Conference on Fluidized Bed Combustion, 2005
 |
| 学科主题 | Boilers |
| 源URL | [http://ir.ipe.ac.cn/handle/122111/59583]  |
| 作者单位 | 1.Institute of Processing Engineering, Chinese Academy of Sciences, Beijing 100080, China 2.Department of Thermal Engineering, Tsinghua University, Beijing 100084, China |
| 推荐引用方式 GB/T 7714 | Xiao, Xianbin,Wang, Wei,Yang, Hairui,et al. Combustion modeling of CFB boiler furnace based on an Euler-Euler approach[C]. 见:. Toronto, ON, Canada. May 22, 2005 - May 25, 2005. |
入库方式： OAI收割
来源：过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。