中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Properties analysis of dry-process calcium carbide slag and study on acetylene gas escape behavior

文献类型:期刊论文

作者Mu, Xiujuan4; Zhu, Ganyu3; Yan, Kun3; Zhao, Liwen1; Li, Shaopeng3; Li, Huiquan2,3; Sun, Guoxin4
刊名Huagong Xuebao/CIESC Journal
出版日期2021-02-01
卷号72期号:2页码:1107-1115
关键词Particle size - Hydrated lime - Lime - Industrial research - Gases - Calcium carbide - Chemical analysis - Waste treatment - Lighting
ISSN号4381157
DOI10.11949/0438-1157.20201263
英文摘要Dry-process calcium carbide slag is a large amount of calcium-based solid waste produced in the process of making acetylene by the calcium carbide process, in which residual calcium carbide and acetylene gas have a greater impact on resource utilization. Focusing on the hidden safety problem caused by the acetylene gathering, the physical and chemical properties of dry calcium carbide slag were analyzed. The changes of residual calcium carbide content and the influences of different temperature, humidity, vibration, open time, gas replacement and other factors on the escape behavior of acetylene gas were investigated. The results show that the main component of calcium carbide slag is calcium hydroxide, and the particle size is concentrated below 75 碌m. The morphology of the slag is polyhedral and loose sheet-like. The residual amount of calcium carbide in the slag fluctuates from 0 to 0.71%. The increase of temperature and moisture can promote the escape of acetylene gas from calcium carbide slag. Vibration has no obvious promotion or suppression effect, moreover, most acetylene can escape from calcium carbide slag with the combination of hanging and air replacement. Through this method, the explosion risk caused by the gathering of acetylene gas can be effectively reduced. The research can provide a reference for the storage, transportation and utilization of calcium carbide slag in the industrial production process. 漏 2021, Editorial Board of CIESC Journal. All right reserved.
学科主题Slags
出版者Materials China
源URL[http://ir.ipe.ac.cn/handle/122111/60347]  
作者单位1.Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming; 650093, China
2.School of Chemical Engineering, University of Chinese Academy of Sciences, Beijing; 100049, China
3.CAS Key Laboratory of Green Process and Engineering, National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Institute of Process Engineering, Chinese Academy of Sciences, Beijing; 100190, China
4.School of Chemistry and Chemical Engineering, University of Jinan, Jinan; 250022, China
推荐引用方式
GB/T 7714
Mu, Xiujuan,Zhu, Ganyu,Yan, Kun,et al. Properties analysis of dry-process calcium carbide slag and study on acetylene gas escape behavior[J]. Huagong Xuebao/CIESC Journal,2021,72(2):1107-1115.
APA Mu, Xiujuan.,Zhu, Ganyu.,Yan, Kun.,Zhao, Liwen.,Li, Shaopeng.,...&Sun, Guoxin.(2021).Properties analysis of dry-process calcium carbide slag and study on acetylene gas escape behavior.Huagong Xuebao/CIESC Journal,72(2),1107-1115.
MLA Mu, Xiujuan,et al."Properties analysis of dry-process calcium carbide slag and study on acetylene gas escape behavior".Huagong Xuebao/CIESC Journal 72.2(2021):1107-1115.

入库方式: OAI收割

来源:过程工程研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。