Preparation of activated carbon from furfural production waste and its application for water pollutants removal and gas separation
文献类型：期刊论文
| 作者 | Sun, Yong1; Wei, Jian2; Yao, Ming-shun3; Yang, Gang1,3 |
| 刊名 | ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING
 |
| 出版日期 | 2012-07-01 |
| 卷号 | 7期号:4页码:547-554 |
| 关键词 | activated carbon furfural production waste chromium phenol gas separation |
| ISSN号 | 1932-2135 |
| 通讯作者 | Yang, G |
| 英文摘要 | Activated carbon (ACs) was produced by chemical activation of industrial furfural production waste (FPW) by different chemical activators. The carbon (HP-AC500) produced from pyrolysis of H3PO4-FPW at 500 degrees C is microporous carbon with certain proportion of mesopores whose Brunauer-Emmett-Teller (BET) surface area and pore volume could reach 751.8 m2/g and 0.63 mL/g, respectively. The carbon (ZN-AC600) produced from pyrolysis of ZnCl2-FPW at 600 degrees C is essentially microporous carbon whose BET surface area and pore volume could reach 1143 m2/g and 0.61 mL/g, respectively. ZN-AC600 carbon shows better performance in adsorbing phenol with its maximum monolayer adsorption capacity reaching 166 mg/g, while HP-AC500 carbon shows its better performance in adsorbing Cr (VI) with maximum monolayer adsorption capacity reaching 27 mg/g. The adsorption model based on Unilan together with Clausius-Clapeyron equation provides a satisfactory representation for low-pressure CO2, CH4, N2 adsorption on ZN-AC600 and HP-AC500, respectively. Both equilibrium and kinetic results show that the HP-AC500 carbon has better CO2 separation performance. Copyright (c) 2011 Curtin University of Technology and John Wiley & Sons, Ltd. |
| WOS标题词 | Science & Technology ; Technology |
| 类目[WOS] | Engineering, Chemical |
| 研究领域[WOS] | Engineering |
| 关键词[WOS] | BLACK LIQUORS ; RICE HUSK ; ADSORPTION ; SURFACE ; CR(VI) ; LIGNIN ; CHROMIUM(VI) ; DIOXIDE ; PHENOL |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000307216300008 |
| 公开日期 | 2013-10-15 |
| 版本 | 出版稿 |
| 源URL | [http://ir.ipe.ac.cn/handle/122111/3229]  |
| 专题 | 过程工程研究所_生化工程国家重点实验室 |
| 作者单位 | 1.Chinese Acad Sci, Inst Proc Engn, Natl Key Lab Biochem Engn, Beijing 100080, Peoples R China 2.Xian Qujiang Water Treatment Plant, Xian 710061, Peoples R China 3.An Peng Soda Ash Co Ltd, An Peng 474730, He Nan, Peoples R China |
| 推荐引用方式 GB/T 7714 | Sun, Yong,Wei, Jian,Yao, Ming-shun,et al. Preparation of activated carbon from furfural production waste and its application for water pollutants removal and gas separation[J]. ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING,2012,7(4):547-554. |
| APA | Sun, Yong,Wei, Jian,Yao, Ming-shun,&Yang, Gang.(2012).Preparation of activated carbon from furfural production waste and its application for water pollutants removal and gas separation.ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING,7(4),547-554. |
| MLA | Sun, Yong,et al."Preparation of activated carbon from furfural production waste and its application for water pollutants removal and gas separation".ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING 7.4(2012):547-554. |
入库方式： OAI收割
来源：过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。