中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
首页 机构 成果 学者
  
  1. CAS IR Grid
  2. 金属研究所
  3. 中国科学院金属研究所
Characteristics and mechanism of surface damage of hybrid ceramic ball bearings for high-precision machine tool

文献类型：期刊论文

作者Zhang, Xiaochen1,2; Wu, Di1; Xia, Zhuofan1,2; Li, Yifeng4; Wang, Jianqiu1,3; Han, En-Hou1,3
刊名ENGINEERING FAILURE ANALYSIS
出版日期2022-12-01
卷号142页码:11
ISSN号1350-6307
关键词Precision hybrid bearing Ceramic ball Performance degradation Surface deformation layer Rolling contact fatigue (RCF)
DOI10.1016/j.engfailanal.2022.106784
通讯作者Wu, Di(dwu@imr.ac.cn) ; Wang, Jianqiu(wangjianqiu@imr.ac.cn)
英文摘要For investigating surface damage mechanism, three types of hybrid ceramic ball bearings, under the same conditions, were installed and tested in the same spindle of a bearing test bench for comparison. Then the damage characteristic morphologies and microstructure at different operation times were systematically characterized using white-light interferometer, scanning electron microscope, and transmission electron microscope. Meanwhile, the damage mode and related microstructure deterioration around the upper layer of surface have been revealed for these three hybrid ceramic ball bearings. Finally, the results present that the surface fatigue behavior is different from the traditional rolling contact fatigue behavior, since the ceramic ball is almost twice as hard as that of the bearing steel. And a large amount of micropits can been found on the surface of the raceways due to the pressing by hard particles detached from the surface of the ceramic balls. Therefore, this surface damage may result in performance degradation of the precision bearing of the machine tool during industrial ultra-precision machining.
资助项目Strategic Priority Research Program of the Chinese Academy of Sciences, China ; [XDC04030400]
WOS研究方向Engineering ; Materials Science
语种英语
出版者PERGAMON-ELSEVIER SCIENCE LTD
WOS记录号WOS:000863093700003
资助机构Strategic Priority Research Program of the Chinese Academy of Sciences, China
源URL[http://ir.imr.ac.cn/handle/321006/175661]  
专题金属研究所_中国科学院金属研究所
通讯作者Wu, Di; Wang, Jianqiu
作者单位1.Chinese Acad Sci, Inst Met Res, CAS Key Lab Nucl Mat & Safety Assessment, 62 Wencui Rd, Shenyang 110016, Peoples R China
2.Univ Sci & Technol China, Sch Mat Sci & Engn, 72 Wenhua Rd, Shenyang 110016, Peoples R China
3.Inst Corros Sci & Technol, 136 Kaiyuan Ave, Guangzhou 510530, Peoples R China
4.Shanghai Univ, Inst Mat, 99 Shangda Rd, Shanghai 200072, Peoples R China
推荐引用方式
GB/T 7714		 Zhang, Xiaochen,Wu, Di,Xia, Zhuofan,et al. Characteristics and mechanism of surface damage of hybrid ceramic ball bearings for high-precision machine tool[J]. ENGINEERING FAILURE ANALYSIS,2022,142:11.
APA Zhang, Xiaochen,Wu, Di,Xia, Zhuofan,Li, Yifeng,Wang, Jianqiu,&Han, En-Hou.(2022).Characteristics and mechanism of surface damage of hybrid ceramic ball bearings for high-precision machine tool.ENGINEERING FAILURE ANALYSIS,142,11.
MLA Zhang, Xiaochen,et al."Characteristics and mechanism of surface damage of hybrid ceramic ball bearings for high-precision machine tool".ENGINEERING FAILURE ANALYSIS 142(2022):11.

入库方式： OAI收割

来源：金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。