Growth mechanism of alpha(p) and interface relationships between alpha(p) and alpha(s) during cooling of alpha near a titanium alloy
文献类型：期刊论文
| 作者 | Jia, Runchen1,3,4; Zeng, Weidong1,3,4; Zhao, Zibo1,2; Wang, Simin1,3,4; Xu, Jianwei1,3,4; Wang, Qingjiang2 |
| 刊名 | MATERIALS & DESIGN
 |
| 出版日期 | 2022-11-01 |
| 卷号 | 223页码:13 |
| ISSN号 | 0264-1275 |
| 关键词 | Cooling rate Epitaxial growth Primary alpha(p) Duplex microstructure Secondary alpha(s) |
| DOI | 10.1016/j.matdes.2022.111191 |
| 通讯作者 | Zeng, Weidong(zengwd@nwpu.edu.cn) ; Zhao, Zibo() |
| 英文摘要 | This paper focused on the interface relationships between primary alpha (alpha(p)) and the precipitation secondary alpha (alpha(s)) phase at different cooling rates from 965 degrees C. The rapid cooling rate favors the precipitation of the secondary alpha(s). And the low cooling rate is conducive to the epitaxial growth of the primary alpha(p). One key finding is that once the grain boundary (alpha(GB)) nucleated on the alpha(p) could grow forward without maintaining the Burgers orientation relationship (BOR) with adjacent beta grains. What's more, HADDF and Fourier-filtered HRTEM images elucidated that two adjacent alpha(p) particles share a common plane but not the same atomic arrangement direction in crystal spatial. Three precipitation types of the alpha(s) were discussed through EBSD and 3D spatial crystalline orientation. Specifically, the as shares common {1 1 2 0} plane with the alpha(p) grains respectively in Type-I and Type-II, but displaying different c axis angle (60 degrees in Type-I and 80 degrees in Type-II). For the Type-III, the secondary as shares common {1 0 1 0} plane with the primary alpha(p), and the angle of c axis between them is 60 degrees. Moreover, the primary alpha(p) do not maintain the BOR with the pre-existing beta, except for Type-I. (C) 2022 The Author(s). Published by Elsevier Ltd. |
| 资助项目 | National Science and Technology Major Project ; National Natural Science Foundation of China ; [J2019 -VI -0005-0119] ; [51905436] |
| WOS研究方向 | Materials Science |
| 语种 | 英语 |
| 出版者 | ELSEVIER SCI LTD |
| WOS记录号 | WOS:000863245400008 |
| 资助机构 | National Science and Technology Major Project ; National Natural Science Foundation of China |
| 源URL | [http://ir.imr.ac.cn/handle/321006/176190]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Zeng, Weidong; Zhao, Zibo |
| 作者单位 | 1.Northwestern Polytech Univ, Sch Mat Sci & Engn, State Key Lab Solidificat Proc, Xian 710072, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 3.Northwestern Polytech Univ, Sch Mat Sci & Engn, Def Technol Innovat Ctr Precis Forging & Ring Roll, Xian 710072, Peoples R China 4.Northwestern Polytech Univ, Shaanxi Key Lab High Performance Precis Forming Te, Xian 710072, Peoples R China |
| 推荐引用方式 GB/T 7714 | Jia, Runchen,Zeng, Weidong,Zhao, Zibo,et al. Growth mechanism of alpha(p) and interface relationships between alpha(p) and alpha(s) during cooling of alpha near a titanium alloy[J]. MATERIALS & DESIGN,2022,223:13. |
| APA | Jia, Runchen,Zeng, Weidong,Zhao, Zibo,Wang, Simin,Xu, Jianwei,&Wang, Qingjiang.(2022).Growth mechanism of alpha(p) and interface relationships between alpha(p) and alpha(s) during cooling of alpha near a titanium alloy.MATERIALS & DESIGN,223,13. |
| MLA | Jia, Runchen,et al."Growth mechanism of alpha(p) and interface relationships between alpha(p) and alpha(s) during cooling of alpha near a titanium alloy".MATERIALS & DESIGN 223(2022):13. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。