Microstructure evolution, tensile properties and deformation mechanism of Fe-6.5 wt.% Si steel doped with yttrium
文献类型：期刊论文
| 作者 | Li, Haoze1; Li, Min2; Cai, Zhihui1; Ma, Lifeng1; Ma, Yingche3 |
| 刊名 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| 出版日期 | 2022-11-24 |
| 卷号 | 859页码:14 |
| ISSN号 | 0921-5093 |
| 关键词 | Yttrium Microstructure Ordered phase Tensile property Deformation mechanism |
| DOI | 10.1016/j.msea.2022.144216 |
| 通讯作者 | Li, Haoze(lhzqq83@163.com) ; Ma, Yingche(ycma@imr.ac.cn) |
| 英文摘要 | Fe-6.5 wt.% Si steels doped with different contents of yttrium were fabricated by vacuum induction melting (VIM), forging, hot rolling and annealing. The microstructure evolution, ordered degree, tensile properties and deformation mechanism were investigated. The results showed that the amount of high-melting precipitates enriched in yttrium increased with the content of yttrium increasing. The solidification, hot rolling and annealing microstructures were refined due to the elevated nucleation rate and the effect of microstructure heredity. The steel containing the highest content of yttrium exhibited the highest tensile ductility and the most developed dimple patterns. Deformation bands appeared in the tensile microstructures at 400 degrees C. Most of the deformation bands in the steels without yttrium and doped with the intermediate content of yttrium possessed the special {112}<111> twinning mis-orientation with the matrix, implying the cooperation of the deformation twinning mechanism. Nevertheless, the smooth stress-strain curves and the absence of the deformation bands indicate the predominance of the dislocation sliding mechanism during the tensile test at 500 degrees C. The present work man-ifested that the doping of yttrium in Fe-6.5 wt.% Si steel could be utilized to raise the intermediate-temperature tensile ductility through purifying the matrix, refining the microstructure and reducing the ordered degree. |
| 资助项目 | National Natural Science Foundation of China ; [51801221] |
| WOS研究方向 | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| 出版者 | ELSEVIER SCIENCE SA |
| WOS记录号 | WOS:000879375900001 |
| 资助机构 | National Natural Science Foundation of China |
| 源URL | [http://ir.imr.ac.cn/handle/321006/176608]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Li, Haoze; Ma, Yingche |
| 作者单位 | 1.Taiyuan Univ Sci & Technol, Sch Mech Engn, Taiyuan 030024, Peoples R China 2.Northeastern Univ, Key Lab Anisotropy & Texture Mat, Minist Educ, Shenyang 110819, Liaoning, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Li, Haoze,Li, Min,Cai, Zhihui,et al. Microstructure evolution, tensile properties and deformation mechanism of Fe-6.5 wt.% Si steel doped with yttrium[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2022,859:14. |
| APA | Li, Haoze,Li, Min,Cai, Zhihui,Ma, Lifeng,&Ma, Yingche.(2022).Microstructure evolution, tensile properties and deformation mechanism of Fe-6.5 wt.% Si steel doped with yttrium.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,859,14. |
| MLA | Li, Haoze,et al."Microstructure evolution, tensile properties and deformation mechanism of Fe-6.5 wt.% Si steel doped with yttrium".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 859(2022):14. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。