The fresh and hardened properties of 3D printing cement-base materials with self-cleaning nano-TiO2:An exploratory study
文献类型：期刊论文
| 作者 | Liu, Qiang; Jiang, Quan; Huang, Mojia; Xin, Jie; Chen, Pengfei |
| 刊名 | JOURNAL OF CLEANER PRODUCTION
 |
| 出版日期 | 2022-12-15 |
| 卷号 | 379 |
| 关键词 | Cement-based 3D printing Nano-TiO2 Printability 3D print material Self-cleaning properties |
| ISSN号 | 0959-6526 |
| 英文摘要 | Cement-based 3D printing (3DP) is going deep into the traditional civil construction due to its advantages, such as saving materials, reducing carbon dioxide emissions and lowering energy requirements. However, the printability of 3DP mortars is the main factor restricting the rapid development of cement-based 3DP technology. The nano-TiO2 (NT) performs obviously self-cleaning effect and has potential merit in improving the printability in cement-based 3DP as an additive. In this study, the printing pastes with different NT dosages and water -cement ratios are designed to reveal the fresh and hardened properties of cement-based 3DP. The test results show that NT has better thickening property and can shorten the setting time, thus reducing the slump and flow diameter. What's more, appropriate NT content can increase the static yield stress of pastes, and reduce the dynamic yield stress and plastic viscosity of pastes at the same time. The mortar with 3% NT dosage has better buildability, compared with undoped NT group, the deformation-rate of the sample increases by 32.4% and the inclination-rate decreases by 52.7%. The mortar with 3% NT dosage also has better density and compressive strength, compared with undoped NT group, the dry density increases by 19.6% and the compressive strength increases by 51.6%. Moreover, the results also indicated that when the water-cement ratio of paste is smaller, its fluidity is smaller, and its static yield stress, dynamic yield performance as well as plastic viscosity are higher. Micro-pores and hydration products of 3DP samples tested by SEM and XRD showed that the NT can refine the pore structure and reinforce the compactness of the mixtures, and the self-cleaning test verified that NT also had obvious self-cleaning performance for cement-based printed samples, which indicates the NT is an ideal 3DP cement additive for clean production and green development in civil construction. |
| 学科主题 | Science & Technology - Other Topics ; Engineering ; Environmental Sciences & Ecology |
| 语种 | 英语 |
| WOS记录号 | WOS:000879975700004 |
| 出版者 | ELSEVIER SCI LTD |
| 源URL | [http://119.78.100.198/handle/2S6PX9GI/34854]  |
| 专题 | 中科院武汉岩土力学所 |
| 作者单位 | 1.Chinese Academy of Sciences; Wuhan Institute of Rock & Soil Mechanics, CAS; 2.Nanchang University |
| 推荐引用方式 GB/T 7714 | Liu, Qiang,Jiang, Quan,Huang, Mojia,et al. The fresh and hardened properties of 3D printing cement-base materials with self-cleaning nano-TiO2:An exploratory study[J]. JOURNAL OF CLEANER PRODUCTION,2022,379. |
| APA | Liu, Qiang,Jiang, Quan,Huang, Mojia,Xin, Jie,&Chen, Pengfei.(2022).The fresh and hardened properties of 3D printing cement-base materials with self-cleaning nano-TiO2:An exploratory study.JOURNAL OF CLEANER PRODUCTION,379. |
| MLA | Liu, Qiang,et al."The fresh and hardened properties of 3D printing cement-base materials with self-cleaning nano-TiO2:An exploratory study".JOURNAL OF CLEANER PRODUCTION 379(2022). |
入库方式： OAI收割
来源：武汉岩土力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。