Effects of Grain Size and Layer Thickness on the Physical and Mechanical Properties of 3D-Printed Rock Analogs
文献类型：期刊论文
| 作者 | Wang, Yao; Li, Shengjun; Song, Rui; Liu, Jianjun; Ye, Min; Peng, Shiqi; Deng, Yongjun |
| 刊名 | ENERGIES
 |
| 出版日期 | 2022-10-01 |
| 卷号 | 15期号:20 |
| 关键词 | 3D printing sandstone porosity compression strength failure behavior |
| 英文摘要 | Due to the complexity of the sedimentary and diagenetic processes, natural rocks generally exhibit strong heterogeneity in mineral composition, physicochemical properties, and pore structure. Currently, 3D printed (3DP) rock analogs fabricated from sandy materials (silica sand) are widely applied to study the petrophysical and geomechanical characteristics of reservoir rocks, which provides an alternative and novel approach for laboratory tests to calibrate the environmental uncertainties, resolve up-scaling issues, and manufacture customized rock specimens with consistent structure and controllable petrophysical properties in a repeatable fashion. In this paper, silica sand with various grain sizes (GS) and Furan resin were used to fabricate rock analogs with different layer thicknesses (LTs) using the binder-jetting 3DP technique. A comprehensive experimental study was conducted on 3DP rock analogs, including helium porosity measurement, micro-CT scanning, SEM, and uniaxial compression. The results indicate that the LT and GS have a great influence on the physical properties, compression strength, and failure behavior of 3DP rock analogs. The porosity decreases (the difference is 7.09%) with the decrease in the LT, while the density and peak strength increase (showing a difference of 0.12 g/cm(3) and 5.67 MPa). The specimens printed at the 200 and 300 mu m LT mainly experience tensile shear destruction with brittle failure characteristics. The ductility of the 3DP rocks increases with the printing LT. The higher the content of the coarse grain (CG), the larger the density and the lower the porosity of the specimens (showing a difference of 0.16 g/cm(3) and 8.8%). The largest peak compression strength with a mean value of 8.53 MPa was recorded in the specimens printed with CG (i.e., 100% CG), and the peak strength experiences a decrease with the increment in the content percentage of the fine grain (FG) (showing a difference of 2.01 MPa). The presented work helps to clarify the controlling factors of the printing process and materials characteristics on the physical and mechanical properties of the 3DP rock analogs, and allows for providing customizable rock analogs with more controllable properties and printing schemes for laboratory tests. |
| 学科主题 | Energy & Fuels |
| 语种 | 英语 |
| WOS记录号 | WOS:000872352000001 |
| 出版者 | MDPI |
| 源URL | [http://119.78.100.198/handle/2S6PX9GI/34974]  |
| 专题 | 中科院武汉岩土力学所 |
| 作者单位 | 1.Chinese Academy of Sciences; Wuhan Institute of Rock & Soil Mechanics, CAS; 2.Southwest University of Science & Technology - China; Southwest University of Science & Technology - China; 3.Southwest University of Science & Technology - China |
| 推荐引用方式 GB/T 7714 | Wang, Yao,Li, Shengjun,Song, Rui,et al. Effects of Grain Size and Layer Thickness on the Physical and Mechanical Properties of 3D-Printed Rock Analogs[J]. ENERGIES,2022,15(20). |
| APA | Wang, Yao.,Li, Shengjun.,Song, Rui.,Liu, Jianjun.,Ye, Min.,...&Deng, Yongjun.(2022).Effects of Grain Size and Layer Thickness on the Physical and Mechanical Properties of 3D-Printed Rock Analogs.ENERGIES,15(20). |
| MLA | Wang, Yao,et al."Effects of Grain Size and Layer Thickness on the Physical and Mechanical Properties of 3D-Printed Rock Analogs".ENERGIES 15.20(2022). |
入库方式： OAI收割
来源：武汉岩土力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。