Neutron radial collimator using Zr–Gd alloy foil as collimating blade for engineering material diffractometer
文献类型：期刊论文
| 作者 | Qiu J.; Hu C.; Liu Y.; Zhou L.; Shen F. ; Jin D.; Du W.; Ding C.; Song W.; Huang Y.
|
| 刊名 | Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
 |
| 出版日期 | 2022 |
| 卷号 | 1033页码:166684 |
| ISSN号 | 0168-9002 |
| DOI | 10.1016/j.nima.2022.166684 |
| 文献子类 | Article |
| 英文摘要 | In this study, 50-μm-thick Zr–Gd alloy foil was used as the collimating blade for a neutron radial collimator. Very thin Zr–Gd alloy foil presents excellent mechanical properties and low neutron transmission compared with a Mylar foil blade coated with gadolinium oxide (Gd2O3). The tensile strength of the 50-μm Zr–80Gd alloy foil is 135 MPa with a 4% thick tolerance, whereas the tensile strength for the 100-μm Mylar foil blade is 50 MPa with a 10% thick tolerance. The neutron transmission for 50-μm-thick Zr–80Gd alloy foil is 35.352% (1- neutron), which performs better than the Mylar foil blade because of the high content of gadolinium. Considering the blade thickness, the gauge volume width for different blade thicknesses was calculated analytically and optimized using McStas. The neutronic properties of a 2-mm gauge volume radial collimator with 240 blades of 50-μm Zr–80Gd alloy foils were simulated using MCNPX. The neutron-to-gamma ratio at the detector surface of the Zr–Gd alloy was higher than that of the Mylar foil blade. The transmission of the radial collimator was 93.6%, and a 2-mm gauge volume was simulated. The construction of a radial collimator using the Zr–Gd alloy blades is in progress. This shows that the Zr–Gd alloy foil provides a new type of high-quality neutron radial collimator blade. © 2022 Elsevier B.V. |
| 电子版国际标准刊号 | 1872-9576 |
| 语种 | 英语 |
| WOS记录号 | WOS:000794040600009 |
| 源URL | [http://ir.ihep.ac.cn/handle/311005/300018]  |
| 专题 | 高能物理研究所_东莞分部 高能物理研究所_加速器中心 高能物理研究所_多学科研究中心 |
| 作者单位 | 中国科学院高能物理研究所 |
| 推荐引用方式 GB/T 7714 | Qiu J.,Hu C.,Liu Y.,et al. Neutron radial collimator using Zr–Gd alloy foil as collimating blade for engineering material diffractometer[J]. Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment,2022,1033:166684. |
| APA | Qiu J..,Hu C..,Liu Y..,Zhou L..,Shen F..,...&Wu G..(2022).Neutron radial collimator using Zr–Gd alloy foil as collimating blade for engineering material diffractometer.Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment,1033,166684. |
| MLA | Qiu J.,et al."Neutron radial collimator using Zr–Gd alloy foil as collimating blade for engineering material diffractometer".Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 1033(2022):166684. |
入库方式： OAI收割
来源：高能物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。