Hygroscopic additive-modified magnesium sulfate thermochemical material construction and heat transfer numerical simulation for low temperature energy storage
文献类型:期刊论文
作者 | Li, Shi-Jie2,3; Yang, Xiang-Yu1; Deng, Li-Sheng4; Fu, Yong-Chun2; Pang, Ming-Jun2; Dong, Ti3; Yu, Yi-Song3; Su, Ling-Na2; Jiang, Shang2 |
刊名 | RSC ADVANCES |
出版日期 | 2022-03-15 |
卷号 | 12期号:14页码:8792-8803 |
DOI | 10.1039/d2ra00344a |
通讯作者 | Li, Shi-Jie() ; Jiang, Shang(jiangshang3714@163.com) |
英文摘要 | In this research, the core objective is to explore the effect of super-absorbent polymer material (poly(sodium acrylate)) on the heat storage performance of magnesium sulfate and to investigate the heat transfer behavior of 13X-zeolite, nano-aluminum oxide (nano-Al2O3) and poly(sodium acrylate) modified magnesium sulfate in a reactor. Finally it provides support for future material and reactor design. All characterizations and performance tests were done in the laboratory and a numerical simulation method was used to investigate the heat transfer behavior of the reactor. Through hydrothermal treatment, bulk MgSO4 center dot 6H(2)O was changed into nanoparticles (200-500 nm) when composited with poly(sodium acrylate), 13X-zeolite and nano-Al2O3. Among these materials, MgSO4 center dot 6H(2)O shows the highest activation energy (36.8 kJ mol(-1)) and the lowest energy density (325 kJ kg(-1)). The activation energy and heat storage energy density of nano-Al2O3 modified composite material MA-1 are 28.5 kJ mol(-1) and 1305 kJ kg(-1), respectively. Poly(sodium acrylate) modified composite material, MPSA-3, shows good heat storage energy density (1100 kJ kg(-1)) and the lowest activation energy (22.3 kJ mol(-1)) due its high water-absorbing rate and dispersing effect. 13X-zeolite modified composite material MZ-2 shows lower activation energy (32.4 kJ mol(-1)) and the highest heat storage density (1411 kJ kg(-1)), which is 4.3 times higher than that of pure magnesium sulfate hexahydrate. According to the heat transfer numerical simulation, hygroscopic additives could prominently change the temperature distribution in the reactor and efficiently release heat to the thermal load side. The experimental and numerical simulation temperatures are similar. This indicates that the result of the numerical simulation is very close to the actual heat transfer behavior. This reactor could output heat at around 50 degrees C and absorb heat in the range of 100-200 degrees C. All these results further prove the strategy that thermochemical nanomaterial synthesis technology combined with material-reactor heat transfer numerical simulation is feasible for future material and reactor design. |
WOS关键词 | ZEOLITE-MGSO4 COMPOSITES ; PROMISING CANDIDATE ; LITHIUM HYDROXIDE ; CARBON ; PUMP |
资助项目 | Key-Area Research and Development Program of Guangdong Province[2020B0202010004] ; National Natural Science Foundation of China[22008237] ; Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi[201802097] ; Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi[2019L0745] ; Datong Applied Basic Research[2019166] |
WOS研究方向 | Chemistry |
语种 | 英语 |
出版者 | ROYAL SOC CHEMISTRY |
WOS记录号 | WOS:000771045600001 |
资助机构 | Key-Area Research and Development Program of Guangdong Province ; National Natural Science Foundation of China ; Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi ; Datong Applied Basic Research |
源URL | [http://ir.giec.ac.cn/handle/344007/35966] |
专题 | 中国科学院广州能源研究所 |
通讯作者 | Li, Shi-Jie; Jiang, Shang |
作者单位 | 1.Taiyuan Univ Technol, Sch Mat Sci & Engn, Taiyuan 030024, Peoples R China 2.Shanxi Datong Univ, Inst Carbon Mat Sci, Datong 037009, Peoples R China 3.Chinese Acad Sci, Guangzhou Inst Energy Convers, Key Lab Renewable Energy, Guangdong Prov Key Lab New & Renewable Energy Res, 2 Nengyuan Rd, Guangzhou 510640, Peoples R China 4.Guangdong Intelligent Filling Technol Ltd Co, 63 F3 5,Zone C,Sanshui Ind Pk, Foshan 528137, Guangdong, Peoples R China |
推荐引用方式 GB/T 7714 | Li, Shi-Jie,Yang, Xiang-Yu,Deng, Li-Sheng,et al. Hygroscopic additive-modified magnesium sulfate thermochemical material construction and heat transfer numerical simulation for low temperature energy storage[J]. RSC ADVANCES,2022,12(14):8792-8803. |
APA | Li, Shi-Jie.,Yang, Xiang-Yu.,Deng, Li-Sheng.,Fu, Yong-Chun.,Pang, Ming-Jun.,...&Jiang, Shang.(2022).Hygroscopic additive-modified magnesium sulfate thermochemical material construction and heat transfer numerical simulation for low temperature energy storage.RSC ADVANCES,12(14),8792-8803. |
MLA | Li, Shi-Jie,et al."Hygroscopic additive-modified magnesium sulfate thermochemical material construction and heat transfer numerical simulation for low temperature energy storage".RSC ADVANCES 12.14(2022):8792-8803. |
入库方式: OAI收割
来源:广州能源研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。