Microstructure and mechanical properties of Cu–10%Al–4%Fe alloy produced by equal channel angular extrusion
文献类型：期刊论文
| 作者 | Gao LL(高雷雷) ; Cheng XH(程先华) |
| 刊名 | Materials and Design
 |
| 出版日期 | 2008 |
| 卷号 | 29页码:904-908 |
| ISSN号 | 0261-3069 |
| 通讯作者 | 程先华 |
| 中文摘要 | A commercial aluminum bronze alloy (Cu–10%Al–4%Fe) produced by hot-rolling was subjected to equal channel angular extrusion (ECAE) process at 550 ℃, 600 ℃ and 650 ℃, respectively. The effects of ECAE on microstructure, phase transformation behavior and mechanical properties of the alloy were investigated. The results showed that the extrusion temperature must be higher than the eutectoid reaction temperature of the alloy. The grain size of alloy gradually reduced with the increase of the pass number of ECAE, and the mechanical properties were significantly improved after ECAE. In addition, phase transformation temperature of the alloy can be reduced by ECAE process. |
| 学科主题 | 材料科学与物理化学 |
| 资助信息 | National Natural Science Foundation of China (Grant No. 50275093);the open fund of State Key Laboratory of Tribology, Tsinghua University and instrumental analysis center of Shanghai Jiao Tong University |
| 收录类别 | SCI |
| 语种 | 英语 |
| 公开日期 | 2013-10-18 |
| 源URL | [http://210.77.64.217/handle/362003/3982]  |
| 专题 | 兰州化学物理研究所_固体润滑国家重点实验室 |
| 推荐引用方式 GB/T 7714 | Gao LL,Cheng XH. Microstructure and mechanical properties of Cu–10%Al–4%Fe alloy produced by equal channel angular extrusion[J]. Materials and Design,2008,29:904-908. |
| APA | 高雷雷,&程先华.(2008).Microstructure and mechanical properties of Cu–10%Al–4%Fe alloy produced by equal channel angular extrusion.Materials and Design,29,904-908. |
| MLA | 高雷雷,et al."Microstructure and mechanical properties of Cu–10%Al–4%Fe alloy produced by equal channel angular extrusion".Materials and Design 29(2008):904-908. |
入库方式： OAI收割
来源：兰州化学物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。