中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
首页 机构 成果 学者
  
  1. CAS IR Grid
  2. 力学研究所
  3. 中国科学院力学研究所
  4. 国家微重力实验室
Wavy interface enables extra strengthening in an additively manufactured high-entropy alloy with Mortise-Tenon architecture

文献类型：期刊论文

作者Bai, Yunjian3,4; Li, Yadong3,4; Wang, Yun-jiang2,4; Zhang, Kun3,4; Jiang, Quanyu3,4; Liu, Zishang3,4; Hu, Zheng1; Wei, Bingchen3,4; Wei BC(魏炳忱); Zhang K(张坤)
刊名INTERNATIONAL JOURNAL OF PLASTICITY
出版日期2023-11-01
卷号170页码:18
关键词High entropy alloy Laminated structure design Additive manufacturing Interface strengthening Local chemical variation
ISSN号0749-6419
DOI10.1016/j.ijplas.2023.103777
通讯作者Zhang, Kun(zhangkun@imech.ac.cn) ; Wei, Bingchen(weibc@imech.ac.cn)
英文摘要Laminated structures have the potential to enhance the performance of high-entropy alloys (HEAs) by providing intriguing interface strengthening. However, laminated HEA designs is uncommon due to the challenges posed by the relatively poor machinability of HEAs. In this study, we successfully fabricate a CoCrNi-Fe50Mn30Co10Cr10 laminated HEA using additive manufacturing technique, incorporating a unique Mortise-Tenon architecture within the alloy. The laminated HEA introduces a novel wavy-shaped interface alongside the conventional flat-shaped interfaces. Tensile tests reveal that the laminated HEA exhibits an exceptional combina-tion of strength and ductility. The measured yield strength exceeds the predicted value based on the rule-of-mixture principle by approximately 36.5 %. This enhancement is attributed to the extra strengthening resulting from the local chemical variation near the heterogeneous interfaces. Interestingly, the wavy-shaped interface has a larger local-chemical-variation zone than the flat-shaped interface, which can trigger more strong interface-dislocation interactions and therefore remarkable strengthening. The Mortise-Tenon architecture not only provides extra interface strengthening, surpassing the yield strength of the two monolithic HEAs, but also preserves the excellent work hardening ability in the early stage of deformation, enabling reasonable ductility. Remarkably, the interface strengthening is comparable in magnitude to dislocation strengthening, contributing to approximately 23 % of the overall yield strength. These findings highlight the potential of laminated HEA designs and the associated interface strengthening as promising strategies for enhancing mechanical performance.
WOS关键词SHORT-RANGE ORDER ; DISLOCATION ; DUCTILITY ; MICROSTRUCTURE ; PLASTICITY ; MECHANISM ; SIZE
资助项目National Natural Science Foundation of China[12272392] ; National Natural Science Foundation of China[11790292] ; Strategic Priority Research Program of the Chinese Academy of Sciences[XDB22040303] ; Innovation Program[237099000000170004]
WOS研究方向Engineering ; Materials Science ; Mechanics
语种英语
WOS记录号WOS:001105765400001
资助机构National Natural Science Foundation of China ; Strategic Priority Research Program of the Chinese Academy of Sciences ; Innovation Program
源URL[http://dspace.imech.ac.cn/handle/311007/93396]  
专题力学研究所_国家微重力实验室
力学研究所_非线性力学国家重点实验室
通讯作者Zhang, Kun; Wei, Bingchen; Wei BC(魏炳忱); Zhang K(张坤)
作者单位1.China North Vehicle Res Inst, Sci & Technol Vehicle Transmiss Lab, Beijing 100072, Peoples R China
2.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China
3.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China
4.Chinese Acad Sci, Inst Mech, Key Lab Micrograv, Natl Micrograv Lab, Beijing 100190, Peoples R China
推荐引用方式
GB/T 7714		 Bai, Yunjian,Li, Yadong,Wang, Yun-jiang,et al. Wavy interface enables extra strengthening in an additively manufactured high-entropy alloy with Mortise-Tenon architecture[J]. INTERNATIONAL JOURNAL OF PLASTICITY,2023,170:18.
APA Bai, Yunjian.,Li, Yadong.,Wang, Yun-jiang.,Zhang, Kun.,Jiang, Quanyu.,...&Bai YJ.(2023).Wavy interface enables extra strengthening in an additively manufactured high-entropy alloy with Mortise-Tenon architecture.INTERNATIONAL JOURNAL OF PLASTICITY,170,18.
MLA Bai, Yunjian,et al."Wavy interface enables extra strengthening in an additively manufactured high-entropy alloy with Mortise-Tenon architecture".INTERNATIONAL JOURNAL OF PLASTICITY 170(2023):18.

入库方式： OAI收割

来源：力学研究所

浏览0
下载0
收藏0
其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。