中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Surface hardness and scratch characteristics of nanosecond laser colored Ti-based metallic glass

文献类型:期刊论文

作者Zhang, Hongyang; Wu, Haoxiang; Zhang, Lin; Jiang MQ(蒋敏强); Huang, Hu; Yan, Jiwang
刊名JOURNAL OF ALLOYS AND COMPOUNDS
出版日期2024-01-05
卷号970页码:7
关键词Metallic glass Laser coloration Surface morphology Nanoindentation hardness Scratch damage mechanism
ISSN号0925-8388
DOI10.1016/j.jallcom.2023.172659
通讯作者Huang, Hu(huanghu@jlu.edu.cn)
英文摘要Pulsed laser irradiation is widely used for coloring metallic glass (MG) surfaces due to its efficient and clean processing characteristics. However, the hardness and tribological properties of laser colored MG surfaces have rarely been studied. In this study, various colors were prepared on Ti-based MGs by nanosecond pulsed laser irradiation, and the mechanical properties of the colored surfaces were subsequently investigated. Before hardness testing, the colored surfaces were slightly polished and characterized for surface morphology and phase composition. The hardness of the colored surfaces was measured by a nanoindentation instrument, and the corresponding load depth curves and residual indentations were obtained. The results showed a 39% increase in hardness compared to the as-cast surface. Scratch tests were performed to investigate the tribological properties of the colored surfaces. The residual scratches and three dimensional (3D) topographies exhibited diverse features, and the scratch damage mechanism was analyzed accordingly. This study broadened the knowledge of surface hardness and tribological properties, and illustrated the application potentials of laser colored MGs.
分类号一类
资助项目Natural Science Foundation of Jilin Province[20220101198JC] ; National Key Research and Develop-ment Plan Project[2022YFB4600204] ; Graduate Inno-vation Fund of Jilin University[2023CX062] ; Fundamental Research Funds for the Central Universities[2023-JCXK-02]
WOS研究方向Chemistry ; Materials Science ; Metallurgy & Metallurgical Engineering
语种英语
WOS记录号WOS:001107027800001
资助机构Natural Science Foundation of Jilin Province ; National Key Research and Develop-ment Plan Project ; Graduate Inno-vation Fund of Jilin University ; Fundamental Research Funds for the Central Universities
其他责任者Huang, Hu
源URL[http://dspace.imech.ac.cn/handle/311007/93508]  
专题力学研究所_非线性力学国家重点实验室
推荐引用方式
GB/T 7714
Zhang, Hongyang,Wu, Haoxiang,Zhang, Lin,et al. Surface hardness and scratch characteristics of nanosecond laser colored Ti-based metallic glass[J]. JOURNAL OF ALLOYS AND COMPOUNDS,2024,970:7.
APA Zhang, Hongyang,Wu, Haoxiang,Zhang, Lin,蒋敏强,Huang, Hu,&Yan, Jiwang.(2024).Surface hardness and scratch characteristics of nanosecond laser colored Ti-based metallic glass.JOURNAL OF ALLOYS AND COMPOUNDS,970,7.
MLA Zhang, Hongyang,et al."Surface hardness and scratch characteristics of nanosecond laser colored Ti-based metallic glass".JOURNAL OF ALLOYS AND COMPOUNDS 970(2024):7.

入库方式: OAI收割

来源:力学研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。