Study on the Guiding Mechanism of Multiple and Empty Holes Under Explosion Load
文献类型：期刊论文
| 作者 | Cao, Ruyang3; Li, Yunpeng3; Feng, Chun1,2 ; Zhang, Yiming3; Feng C(冯春)
|
| 刊名 | MINING METALLURGY & EXPLORATION
 |
| 出版日期 | 2023-12-19 |
| 页码 | 10 |
| 关键词 | Induced hole CDEM Crack propagation Double hole blasting Precise blasting |
| ISSN号 | 2524-3462 |
| DOI | 10.1007/s42461-023-00902-2 |
| 通讯作者 | Li, Yunpeng(202311601008@stu.hebut.edu.cn) |
| 英文摘要 | In the past, the selection of the number of empty holes between blast holes heavily relied on the subjective experience of practitioners, leading to unsatisfactory blasting results. The number of empty holes between blast holes is particularly important for the perforation of explosive cracks. In order to determine the optimum number of empty holes for inducing the propagation of explosive cracks, a two-dimensional numerical model of two-hole blasting was established based on the continuous-discontinuous element method (CDEM) using polymethyl methacrylate (PMMA) as the medium, and numerical simulation of various working conditions was conducted; the simulation results are basically consistent with the PMMA model test. Through the analysis of blasting parameters, the optimal number of empty holes with a certain hole spacing is fitted. The following conclusions are drawn: (1) There is a threshold for variable x. When x exceeds 50, the presence of empty holes cannot lead to the perforation of explosive cracks between the blast holes. (2) When x is below 50, the optimal number of empty holes inducing the propagation of explosive cracks can be determined through fitting an empirical formula. By adjusting the number of empty holes between blast holes, a significant spacing between adjacent blast holes was achieved, allowing for effective penetration, so as to effectively "induce" the direction of the fracture zone and make full use of the energy of explosives. The research results of this paper are conducive to the research of directional blasting technology and provide certain references for the optimization of precision blasting parameters. |
| WOS关键词 | PROPAGATION ; COAL |
| 资助项目 | National Natural Science Foundation of China |
| WOS研究方向 | Metallurgy & Metallurgical Engineering ; Mining & Mineral Processing |
| 语种 | 英语 |
| WOS记录号 | WOS:001127293000001 |
| 资助机构 | National Natural Science Foundation of China |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/93749]  |
| 专题 | 力学研究所_流固耦合系统力学重点实验室(2012-) |
| 通讯作者 | Li, Yunpeng |
| 作者单位 | 1.Univ Chinese Acad Sci, Sch Engn Sci, Yuquan Rd 19, Beijing 100049, Peoples R China 2.Chinese Acad Sci, Inst Mech, North 4th Ring Rd 15, Beijing 100190, Peoples R China 3.Hebei Univ Technol, Sch Civil & Transportat Engn, Xiping Rd 5340, Tianjin 300401, Peoples R China |
| 推荐引用方式 GB/T 7714 | Cao, Ruyang,Li, Yunpeng,Feng, Chun,et al. Study on the Guiding Mechanism of Multiple and Empty Holes Under Explosion Load[J]. MINING METALLURGY & EXPLORATION,2023:10. |
| APA | Cao, Ruyang,Li, Yunpeng,Feng, Chun,Zhang, Yiming,&冯春.(2023).Study on the Guiding Mechanism of Multiple and Empty Holes Under Explosion Load.MINING METALLURGY & EXPLORATION,10. |
| MLA | Cao, Ruyang,et al."Study on the Guiding Mechanism of Multiple and Empty Holes Under Explosion Load".MINING METALLURGY & EXPLORATION (2023):10. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。