Study on heat transfer coupling mechanism of direct thermoelectric conversion with regenerative cooling for supersonic combustor applications
文献类型：期刊论文
| 作者 | Gao EK(高尔康) ; Zhong FQ(仲峰泉)
|
| 刊名 | APPLIED THERMAL ENGINEERING
 |
| 出版日期 | 2024-02-01 |
| 卷号 | 238页码:15 |
| ISSN号 | 1359-4311 |
| 关键词 | Direct thermoelectric conversion Regenerative cooling Supersonic combustor Analytical model Genetic algorithm |
| DOI | 10.1016/j.applthermaleng.2023.122218 |
| 通讯作者 | Zhong, Fengquan(fzhong@imech.ac.cn) |
| 英文摘要 | Direct thermoelectric conversion is a promising technology that converts aerodynamic and combustion heat into electric energy for thermal management of supersonic combustors. However, the heat transfer process of direct thermoelectric conversion coupled with regenerative cooling of supersonic combustors is rarely studied and the coupling mechanism is not clear. In this paper, a novel "SANDWICH" thermoelectric/cooling integrated model (TCIM) proposed by the present work based on Skutterudite (SKD) or Half-Heusler (HH) thermoelectric conversion devices is analytically studied. The energy conversion and heat transfer mechanism of the direct thermoelectric conversion coupled with regenerative cooling are revealed. Using the analytical model, the effects of structural parameters of thermoelectric conversion device and the heat transfer coefficient of regenerative cooling on the energy conversion efficiency and output power are investigated for two typical thermal conditions corresponding to the isolation part and the combustion part of a Mach 2.5 supersonic combustor. The analytical results showed that larger size of the thermoelectric conversion device can effectively improve the conversion efficiency and output power per unit area. Increasing the heat transfer coefficient of regenerative cooling can lower the structural temperature and increase the output power per unit area by more than 12%. Furthermore, with a multi-parameter optimization method based on Genetic Algorithm, optimization for the output power per unit area is conducted with variations of the structural parameters of TCIM under constraints of the tolerance temperature and the types of thermoelectric conversion devices. A more than 10% increase in the output power per unit area for both SKD and HH TCIMs are achieved via the optimization. |
| 分类号 | 一类 |
| WOS关键词 | AVIATION KEROSENE ; POWER-GENERATION ; HYDROCARBON FUEL |
| 资助项目 | Natural Science Foundation of China[12272381] |
| WOS研究方向 | Thermodynamics ; Energy & Fuels ; Engineering ; Mechanics |
| 语种 | 英语 |
| WOS记录号 | WOS:001140171100001 |
| 资助机构 | Natural Science Foundation of China |
| 其他责任者 | Zhong, Fengquan |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/94183]  |
| 专题 | 力学研究所_高温气体动力学国家重点实验室 |
| 推荐引用方式 GB/T 7714 | Gao EK,Zhong FQ. Study on heat transfer coupling mechanism of direct thermoelectric conversion with regenerative cooling for supersonic combustor applications[J]. APPLIED THERMAL ENGINEERING,2024,238:15. |
| APA | 高尔康,&仲峰泉.(2024).Study on heat transfer coupling mechanism of direct thermoelectric conversion with regenerative cooling for supersonic combustor applications.APPLIED THERMAL ENGINEERING,238,15. |
| MLA | 高尔康,et al."Study on heat transfer coupling mechanism of direct thermoelectric conversion with regenerative cooling for supersonic combustor applications".APPLIED THERMAL ENGINEERING 238(2024):15. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。