Effect of Pouring Temperature by a Novel Micro Fused-Casting on Microstructure and Properties of ZL101 Semisolid Slurry
文献类型：期刊论文
| 作者 | Luo XQ(罗晓强)1,2; Han, Yongjun2; Hou, Yanmin2; Li, Qingbin2; Jin, Yu2 |
| 刊名 | JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
 |
| 出版日期 | 2023-10-01 |
| 卷号 | 38期号:5页码:1179-1183 |
| ISSN号 | 1000-2413 |
| 关键词 | ZL101 aluminum alloy semisolid micro fused-casting pouring temperature |
| DOI | 10.1007/s11595-023-2807-0 |
| 通讯作者 | Jin, Yu(27140@pdsu.edu.cn) |
| 英文摘要 | A novel micro fused-casting (MFC) process is developed for semisolid aluminum alloy slurry. The microstructure evolution and properties of semisolid ZL101 aluminum alloy slurry with different pouring temperature by MFC are investigated in this paper. During the cooling process, the effects of the pouring temperature on microstructure and properties is primarily analyzed. The microstructure of the semisolid ZL101 aluminum alloy is more homogeneous and the grain is smaller under proper pouring temperature. Temperature of liquids and solids of ZL101 aluminum alloy is measured by differential scanning calorimetry (DSC). Distribution and characteristics of the microstructure of samples are examined by optical microscope (OM), scanning electron microscopy (SEM) equipped with energy dispersive spectrometer (EDS). The results show that the ZL101 semisolid slurry fabricated by MFC presents uniform shape and good grain size under the pouring temperature of 594 degrees C and the stirring velocity of 600 r/min, and the fine grains of the primary alpha-Al phase with average grain size of 55 mu m and shape factor up to 0.67 were obtained. Besides, the ultimate tensile strength and the average Vickers hardness for semisolid ZL101 aluminum slurry are 178.19 +/- 1.37 MPa and 86.15 +/- 1.16 HV, respectively. |
| 分类号 | Q4 |
| WOS关键词 | ALLOY ; METAL |
| WOS研究方向 | Materials Science |
| 语种 | 英语 |
| WOS记录号 | WOS:001104902000001 |
| 其他责任者 | Jin, Yu |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/93994]  |
| 专题 | 宽域飞行工程科学与应用中心 |
| 作者单位 | 1.Chinese Acad Sci, Inst Mech, Beijing 100190, Peoples R China 2.Pingdingshan Univ, Pingdingshan 467000, Peoples R China; |
| 推荐引用方式 GB/T 7714 | Luo XQ,Han, Yongjun,Hou, Yanmin,et al. Effect of Pouring Temperature by a Novel Micro Fused-Casting on Microstructure and Properties of ZL101 Semisolid Slurry[J]. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION,2023,38(5):1179-1183. |
| APA | 罗晓强,Han, Yongjun,Hou, Yanmin,Li, Qingbin,&Jin, Yu.(2023).Effect of Pouring Temperature by a Novel Micro Fused-Casting on Microstructure and Properties of ZL101 Semisolid Slurry.JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION,38(5),1179-1183. |
| MLA | 罗晓强,et al."Effect of Pouring Temperature by a Novel Micro Fused-Casting on Microstructure and Properties of ZL101 Semisolid Slurry".JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION 38.5(2023):1179-1183. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。