Application-inspired additive manufacturing of Raman optics
文献类型：期刊论文
| 作者 | T. Grabe; T. Biermann; A. Wolf; J. Al-Nuwaider; H. Krauss; J. August; W. Yu; J. B. Heinz; M. Bayerl; K. Xu |
| 刊名 | Optics and Laser Technology
 |
| 出版日期 | 2023 |
| 卷号 | 165 |
| ISSN号 | 00303992 |
| DOI | 10.1016/j.optlastec.2023.109574 |
| 英文摘要 | While additive manufacturing (AM) enables the production of versatile optical components, the limited knowledge of manufacturing processes makes the development of accurate simulation tools and evaluation criteria challenging. In this work, we present a novel approach to address the specific challenges in the AM of optics by designing and fabricating freeform probe lenses for Raman Spectroscopy (RS) using the Multi-Jet Modeling (MJM) printing process. We successfully integrate the lenses into an RS system and demonstrate their performance in detecting melamine with a maximum signal-to-noise ratio of 164[Formula presented]. We outline the capabilities and limitations of the AM process and adapt simulations to reveal the potential impact of manufacturing tolerances and diffraction effects on layered optical components. Based on our results, we highlight the potential to develop novel design standards for the AM of optics, providing a platform for further exploration and investigation. © 2023 The Author(s) |
| URL标识 | 查看原文 |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/67489]  |
| 专题 | 中国科学院长春光学精密机械与物理研究所 |
| 推荐引用方式 GB/T 7714 | T. Grabe,T. Biermann,A. Wolf,et al. Application-inspired additive manufacturing of Raman optics[J]. Optics and Laser Technology,2023,165. |
| APA | T. Grabe.,T. Biermann.,A. Wolf.,J. Al-Nuwaider.,H. Krauss.,...&W. Ren and R. Lachmayer.(2023).Application-inspired additive manufacturing of Raman optics.Optics and Laser Technology,165. |
| MLA | T. Grabe,et al."Application-inspired additive manufacturing of Raman optics".Optics and Laser Technology 165(2023). |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。