Experimental study on the heat transfer performance of a vapour chamber with porous wick structures printed via metallic additive manufacturing
文献类型：期刊论文
| 作者 | X. Meng, S. Tan, Z. Yuan, Y. Zhang and L. Chen |
| 刊名 | International Communications in Heat and Mass Transfer
 |
| 出版日期 | 2023 |
| 卷号 | 140 |
| ISSN号 | 07351933 |
| DOI | 10.1016/j.icheatmasstransfer.2022.106496 |
| 英文摘要 | Two types of vapour chamber with integrated three-dimensionally (3D) printed wicks, namely a single-pore 3D printed wick vapour chamber and hybrid-pore 3D printed wick vapour chamber, were designed, printed, and tested to demonstrate the feasibility of constructing VCs through metallic additive manufacturing. A water-cooling test system was established to study the temperature distribution, thermal resistance, and maximum heat transfer power of the VCs. The effects of the cooling-water temperature, heat source area, and hybrid-pore wick structure on the heat transfer performance of the VCs were explored. The results show that the vapour chamber with a 3D printed wick had efficient heat transfer in the range of 0–100 W. The cooling-water temperature greatly affected the heat transfer performance of the VCs. The 3D printed hybrid-pore wick improved the temperature uniformity and heat transfer of the VC. When P = 100 W, the thermal resistance of the hybrid-pore 3D printed wick vapour chamber was 0.077 °C/W at a cooling-water temperature Tw = 40 °C. The test results indicate that the application of Additive Manufacturing (AM) in fabricating high-performance VCs is feasible and provides more freedom in terms of customizing the heat transfer performance and integrating with the structural design of the heat source. © 2022 Elsevier Ltd |
| URL标识 | 查看原文 |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/67768]  |
| 专题 | 中国科学院长春光学精密机械与物理研究所 |
| 推荐引用方式 GB/T 7714 | X. Meng, S. Tan, Z. Yuan, Y. Zhang and L. Chen. Experimental study on the heat transfer performance of a vapour chamber with porous wick structures printed via metallic additive manufacturing[J]. International Communications in Heat and Mass Transfer,2023,140. |
| APA | X. Meng, S. Tan, Z. Yuan, Y. Zhang and L. Chen.(2023).Experimental study on the heat transfer performance of a vapour chamber with porous wick structures printed via metallic additive manufacturing.International Communications in Heat and Mass Transfer,140. |
| MLA | X. Meng, S. Tan, Z. Yuan, Y. Zhang and L. Chen."Experimental study on the heat transfer performance of a vapour chamber with porous wick structures printed via metallic additive manufacturing".International Communications in Heat and Mass Transfer 140(2023). |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。