Operating effect of filler on filling roll bending of integral panel
文献类型：期刊论文
| 作者 | Li, Hanwei4; Song, Hongwu4; Zhang, Shihong4; Wan, Li1; Jia, Chunli1; Chai, Xueting1; Zhang, Guowei1; Lazarescu, Lucian3; Banabic, Dorel3 |
| 刊名 | TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
 |
| 出版日期 | 2023 |
| 卷号 | 33期号:8页码:2314-2327 |
| 关键词 | integral panel roll bending filler neutral layer generatrix straightness |
| ISSN号 | 1003-6326 |
| 英文摘要 | A filling roll bending process of a 2A12 aluminum alloy integral panel with polypropylene as filler was studied. The operating effect of filler was revealed, based on analytical, numerical, and experimental methods. The results show that the position difference of the neutral layer between the ribs and the web of the integral panel leads to the error of generatrix straightness, and the filler can reduce this difference. A certain range of the width gap (1-3 mm) between filler and rib can avoid the instability of the rib and the curl of the filler. The height gap between filler and rib determines the compression degree of filler. The best pressure transmission effect can be achieved as the filler is still higher than the rib (1 mm) after compression. The elastic modulus of filler slightly affects the forming accuracy of the integral panel within a certain range (450-1300 MPa). Still, the filler transfers insufficient pressure under lower elastic modulus (50 MPa) and limits the deformation of the integral panel under higher elastic modulus (20 GPa). Experimentally measured generatrix straightness verified the operating effect of filler. |
| 语种 | 英语 |
| WOS记录号 | WOS:001082205400001 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/177321]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.Capital Aerosp Machinery Corp Ltd 2.University of Science & Technology of China, CAS 3.Technical University of Cluj Napoca 4.Institute of Metal Research, CAS |
| 推荐引用方式 GB/T 7714 | Li, Hanwei,Song, Hongwu,Zhang, Shihong,et al. Operating effect of filler on filling roll bending of integral panel[J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA,2023,33(8):2314-2327. |
| APA | Li, Hanwei.,Song, Hongwu.,Zhang, Shihong.,Wan, Li.,Jia, Chunli.,...&Banabic, Dorel.(2023).Operating effect of filler on filling roll bending of integral panel.TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA,33(8),2314-2327. |
| MLA | Li, Hanwei,et al."Operating effect of filler on filling roll bending of integral panel".TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA 33.8(2023):2314-2327. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。